Gabriele Cosmo
166 lines
5.4 KiB
Markdown
166 lines
5.4 KiB
Markdown
\page ExampleTestEm2 Example TestEm2
|
|
|
|
How to do shower profiles in an homogenous medium, with virtual
|
|
voxelisation.
|
|
|
|
## GEOMETRY DEFINITION
|
|
|
|
The geometry consists of a cylinder of homogenous material.
|
|
|
|
The default geometry is constructed in DetectorConstruction class,
|
|
but all of the above parameters can be modified interactively via
|
|
the commands defined in the DetectorMessenger class.
|
|
|
|
Material can be choosen: Air, Water, lAr, Al, Fe, BGO, PbWO4, Pb.
|
|
eg:
|
|
```
|
|
/testem/det/setMat PbWO4
|
|
```
|
|
|
|
The cylinder is virtually sliced longitudinally (slice) and radially
|
|
(ring). The size of the slices and rings are expressed in radiation
|
|
length units and can be changed.
|
|
eg:
|
|
```
|
|
/testem/det/setLbin 20 1. ---> 20 slices of 1. radl
|
|
/testem/det/setRbin 5 0.25 ---> 5 rings of 0.25 radl
|
|
```
|
|
(MaxBin = 500 in both directions)
|
|
|
|
An uniform magnetic field along the cylinder axis can be set.
|
|
eg:
|
|
```
|
|
/globalField/setValue 0 0 5 tesla
|
|
```
|
|
|
|
## PHYSICS LISTS
|
|
|
|
Physics lists are based on modular design. Several modules are instantiated:
|
|
1. Transportation
|
|
2. EM physics
|
|
3. Decays
|
|
4. StepMax - for step limitation
|
|
|
|
EM physics builders can be local (eg. in this example) or from G4 kernel
|
|
physics_lists subdirectory.
|
|
|
|
Local physics builders:
|
|
- "local" standard EM physics with current 'best' options setting.
|
|
these options are explicited in PhysListEmStandard
|
|
|
|
From geant4/source/physics_lists/builders:
|
|
- "emstandard_opt0" recommended standard EM physics for LHC
|
|
- "emstandard_opt1" best CPU performance standard physics for LHC
|
|
- "emstandard_opt2" similar fast simulation
|
|
- "emstandard_opt3" best standard EM options - analog to "local" above
|
|
- "emstandard_opt4" best current advanced EM options standard + lowenergy
|
|
- "emstandardWVI" standard EM physics and WentzelVI multiple scattering
|
|
- "emstandardSS" standard EM physics and single scattering model
|
|
- "emlivermore" low-energy EM physics using Livermore data
|
|
- "empenelope" low-energy EM physics implementing Penelope models
|
|
- "emlowenergy" low-energy EM physics implementing experimental
|
|
low-energy models
|
|
|
|
Physics lists and options can be (re)set with UI commands
|
|
|
|
## AN EVENT : THE PRIMARY GENERATOR
|
|
|
|
The primary kinematic consists of a single particle which hits the
|
|
cylinder perpendicular to the input face. The type of the particle
|
|
and its energy are set in the PrimaryGeneratorAction class, and can
|
|
changed via the G4 build-in commands of G4ParticleGun class (see
|
|
the macros provided with this example).
|
|
|
|
A RUN is a set of events.
|
|
|
|
## VISUALIZATION
|
|
|
|
The Visualization Manager is set in the main().
|
|
The initialisation of the drawing is done via the commands
|
|
`/vis/..` in the macro vis.mac. In interactive session:
|
|
```
|
|
PreInit or Idle > /control/execute vis.mac
|
|
```
|
|
|
|
The detector has a default view which is a longitudinal view of the
|
|
cylinder.
|
|
|
|
The tracks are drawn at the end of event, and erased at the end of run.
|
|
Optionally one can choose to draw all particles, only the charged one,
|
|
or none. This command is defined in EventActionMessenger class.
|
|
|
|
## PHYSICS DEMO
|
|
|
|
The particle's type and the physics processes which will be available
|
|
in this example are set in PhysicsList class.
|
|
|
|
In addition a build-in interactive command (`/process/inactivate procname`)
|
|
allows to activate/inactivate the processes one by one.
|
|
|
|
The shower profiles are histogramed, if histograming is activated.
|
|
They can be also printed with the command /testem/run/verbose 1
|
|
|
|
## HOW TO START ?
|
|
|
|
- Execute TestEm2 in 'batch' mode from macro files
|
|
```
|
|
% ./TestEm2 run01.mac
|
|
```
|
|
|
|
- Execute TestEm2 in 'batch' mode using multi-threading
|
|
```
|
|
% ./TestEm2 run01.mac 4
|
|
```
|
|
here 4 is number of threads, it should be user defined,
|
|
optimal value depends on hardware
|
|
|
|
- Execute TestEm2 in 'interactive mode' with visualization
|
|
```
|
|
% ./TestEm2
|
|
....
|
|
Idle> type your commands
|
|
....
|
|
Idle> exit
|
|
```
|
|
|
|
Macros provided in this example:
|
|
- egs4.mac:
|
|
Fe; L = 20 radl; R = 5 radl; electron 30 GeV
|
|
(EGS4 simulation: Particle Data Group - Phys.Rev.D 50-3 - August94)
|
|
- run01.mac: PbWO4; L = 20 radl; R = 5 radl; electron 5 GeV
|
|
- run02.mac: Al; L = 13.5 radl; R = 1.35 radl; electron 1 GeV
|
|
(Electron-induced cascade showers: J&H Crannel - Phys. Rev. 184-2 - August69)
|
|
- run03.mac: H2O; L = 9.97 radl; R = 0.665 radl; electron 1 GeV
|
|
(Electron-induced cascade showers: J&H Crannel - Phys. Rev. 184-2 - August69)
|
|
- test.mac: PbWO4; L = 20 radl; R = 5 radl; electron 5 GeV
|
|
- stepMax.mac: chargedgeantino in PbWO4; To illustrate step max mechanism;
|
|
- vis.mac: to activate visualization
|
|
|
|
## HISTOGRAMS
|
|
|
|
TestEm2 produces several histograms:
|
|
|
|
Content of these histo:
|
|
|
|
- 1 : energy deposit per event
|
|
- 2 : charged track length per event
|
|
- 3 : neutral track length per event
|
|
|
|
- 4 : longitudinal energy profile
|
|
- 5 : rms of longitudinal energy profile
|
|
- 6 : cumulated longitudinal energy profile
|
|
- 7 : rms of cumulated longitudinal energy profile
|
|
|
|
- 8 : radial energy profile
|
|
- 9 : rms of radial energy profile
|
|
- 10 : cumulated radial energy profile
|
|
- 11 : rms of cumulated radial energy profile
|
|
|
|
To define the output file name with histograms, use the UI command :
|
|
```
|
|
/analysis/setFileName name
|
|
```
|
|
|
|
The format of the histogram file can be : root (default),
|
|
xml, csv, by changing the default file type in RunAction.cc.
|