Gabriele Cosmo
742 lines
41 KiB
Plaintext
742 lines
41 KiB
Plaintext
Environment variable "G4FORCE_RUN_MANAGER_TYPE" enabled with value == Serial. Forcing G4RunManager type...
|
|
|
|
############################################
|
|
!!! WARNING - FPE detection is activated !!!
|
|
############################################
|
|
|
|
|
|
################################
|
|
!!! G4Backtrace is activated !!!
|
|
################################
|
|
|
|
|
|
**************************************************************
|
|
Geant4 version Name: geant4-11-03-patch-02 (25-April-2025)
|
|
Copyright : Geant4 Collaboration
|
|
References : NIM A 506 (2003), 250-303
|
|
: IEEE-TNS 53 (2006), 270-278
|
|
: NIM A 835 (2016), 186-225
|
|
WWW : http://geant4.org/
|
|
**************************************************************
|
|
|
|
/control/cout/ignoreThreadsExcept 0
|
|
/run/numberOfThreads 2
|
|
*** /run/numberOfThreads command is issued in sequential mode.
|
|
Command is ignored.
|
|
/run/verbose 1
|
|
/testem/det/setMat G4_PbWO4
|
|
/testem/det/setLbin 40 0.5
|
|
/testem/det/setRbin 50 0.1
|
|
/testem/run/acceptance 0.949 0.0082 3.0
|
|
/testem/phys/addPhysics emstandard_opt0
|
|
/run/setCut 1.0 mm
|
|
/process/em/verbose 1
|
|
/process/em/workerVerbose 0
|
|
/process/em/printParameters
|
|
=======================================================================
|
|
====== Electromagnetic Physics Parameters ========
|
|
=======================================================================
|
|
LPM effect enabled 1
|
|
Enable creation and use of sampling tables 0
|
|
Apply cuts on all EM processes 0
|
|
Use combined TransportationWithMsc Disabled
|
|
Use general process 1
|
|
Enable linear polarisation for gamma 0
|
|
Enable photoeffect sampling below K-shell 1
|
|
Enable sampling of quantum entanglement 0
|
|
X-section factor for integral approach 0.8
|
|
Min kinetic energy for tables 100 eV
|
|
Max kinetic energy for tables 100 TeV
|
|
Number of bins per decade of a table 7
|
|
Verbose level 1
|
|
Verbose level for worker thread 0
|
|
Bremsstrahlung energy threshold above which
|
|
primary e+- is added to the list of secondary 100 TeV
|
|
Bremsstrahlung energy threshold above which primary
|
|
muon/hadron is added to the list of secondary 100 TeV
|
|
Positron annihilation at rest model SimplePositronium
|
|
Enable 3 gamma annihilation on fly 0
|
|
Lowest triplet kinetic energy 1 MeV
|
|
Enable sampling of gamma linear polarisation 0
|
|
5D gamma conversion model type 0
|
|
5D gamma conversion model on isolated ion 0
|
|
Use Ricardo-Gerardo pair production model 0
|
|
Livermore data directory epics_2017
|
|
=======================================================================
|
|
====== Ionisation Parameters ========
|
|
=======================================================================
|
|
Step function for e+- (0.2, 1 mm)
|
|
Step function for muons/hadrons (0.2, 0.1 mm)
|
|
Step function for light ions (0.2, 0.1 mm)
|
|
Step function for general ions (0.2, 0.1 mm)
|
|
Lowest e+e- kinetic energy 1 keV
|
|
Lowest muon/hadron kinetic energy 1 keV
|
|
Use ICRU90 data 0
|
|
Fluctuations of dE/dx are enabled 1
|
|
Type of fluctuation model for leptons and hadrons Urban
|
|
Use built-in Birks satuaration 0
|
|
Build CSDA range enabled 0
|
|
Use cut as a final range enabled 0
|
|
Enable angular generator interface 0
|
|
Max kinetic energy for CSDA tables 1 GeV
|
|
Max kinetic energy for NIEL computation 0 eV
|
|
Linear loss limit 0.01
|
|
Read data from file for e+e- pair production by mu 0
|
|
=======================================================================
|
|
====== Multiple Scattering Parameters ========
|
|
=======================================================================
|
|
Type of msc step limit algorithm for e+- 1
|
|
Type of msc step limit algorithm for muons/hadrons 0
|
|
Msc lateral displacement for e+- enabled 1
|
|
Msc lateral displacement for muons and hadrons 0
|
|
Urban msc model lateral displacement alg96 1
|
|
Range factor for msc step limit for e+- 0.04
|
|
Range factor for msc step limit for muons/hadrons 0.2
|
|
Geometry factor for msc step limitation of e+- 2.5
|
|
Safety factor for msc step limit for e+- 0.6
|
|
Skin parameter for msc step limitation of e+- 1
|
|
Lambda limit for msc step limit for e+- 1 mm
|
|
Use Mott correction for e- scattering 0
|
|
Factor used for dynamic computation of angular
|
|
limit between single and multiple scattering 1
|
|
Fixed angular limit between single
|
|
and multiple scattering 3.1416 rad
|
|
Upper energy limit for e+- multiple scattering 100 MeV
|
|
Type of electron single scattering model 0
|
|
Type of nuclear form-factor 1
|
|
Screening factor 1
|
|
=======================================================================
|
|
/run/initialize
|
|
|
|
Absorber is 17.8491 cm of G4_PbWO4 R= 4.46227 cm
|
|
|
|
Material: G4_PbWO4 density: 8.280 g/cm3 RadL: 8.925 mm Nucl.Int.Length: 20.740 cm
|
|
Imean: 542.741 eV temperature: 293.15 K pressure: 1.00 atm
|
|
|
|
---> Element: O (O) Z = 8.0 N = 16 A = 15.999 g/mole
|
|
---> Isotope: O16 Z = 8 N = 16 A = 15.99 g/mole abundance: 99.757 %
|
|
---> Isotope: O17 Z = 8 N = 17 A = 17.00 g/mole abundance: 0.038 %
|
|
---> Isotope: O18 Z = 8 N = 18 A = 18.00 g/mole abundance: 0.205 %
|
|
ElmMassFraction: 14.06 % ElmAbundance 66.67 %
|
|
|
|
---> Element: Pb (Pb) Z = 82.0 N = 207 A = 207.217 g/mole
|
|
---> Isotope: Pb204 Z = 82 N = 204 A = 203.97 g/mole abundance: 1.400 %
|
|
---> Isotope: Pb206 Z = 82 N = 206 A = 205.97 g/mole abundance: 24.100 %
|
|
---> Isotope: Pb207 Z = 82 N = 207 A = 206.98 g/mole abundance: 22.100 %
|
|
---> Isotope: Pb208 Z = 82 N = 208 A = 207.98 g/mole abundance: 52.400 %
|
|
ElmMassFraction: 45.54 % ElmAbundance 16.67 %
|
|
|
|
---> Element: W (W) Z = 74.0 N = 184 A = 183.842 g/mole
|
|
---> Isotope: W180 Z = 74 N = 180 A = 179.95 g/mole abundance: 0.120 %
|
|
---> Isotope: W182 Z = 74 N = 182 A = 181.95 g/mole abundance: 26.500 %
|
|
---> Isotope: W183 Z = 74 N = 183 A = 182.95 g/mole abundance: 14.310 %
|
|
---> Isotope: W184 Z = 74 N = 184 A = 183.95 g/mole abundance: 30.640 %
|
|
---> Isotope: W186 Z = 74 N = 186 A = 185.95 g/mole abundance: 28.430 %
|
|
ElmMassFraction: 40.40 % ElmAbundance 16.67 %
|
|
|
|
/gun/particle e-
|
|
/gun/energy 5 GeV
|
|
/run/printProgress 20
|
|
/testem/run/verbose 1
|
|
/run/beamOn 100
|
|
=======================================================================
|
|
====== Electromagnetic Physics Parameters ========
|
|
=======================================================================
|
|
LPM effect enabled 1
|
|
Enable creation and use of sampling tables 0
|
|
Apply cuts on all EM processes 0
|
|
Use combined TransportationWithMsc Disabled
|
|
Use general process 1
|
|
Enable linear polarisation for gamma 0
|
|
Enable photoeffect sampling below K-shell 1
|
|
Enable sampling of quantum entanglement 0
|
|
X-section factor for integral approach 0.8
|
|
Min kinetic energy for tables 100 eV
|
|
Max kinetic energy for tables 100 TeV
|
|
Number of bins per decade of a table 7
|
|
Verbose level 1
|
|
Verbose level for worker thread 0
|
|
Bremsstrahlung energy threshold above which
|
|
primary e+- is added to the list of secondary 100 TeV
|
|
Bremsstrahlung energy threshold above which primary
|
|
muon/hadron is added to the list of secondary 100 TeV
|
|
Positron annihilation at rest model SimplePositronium
|
|
Enable 3 gamma annihilation on fly 0
|
|
Lowest triplet kinetic energy 1 MeV
|
|
Enable sampling of gamma linear polarisation 0
|
|
5D gamma conversion model type 0
|
|
5D gamma conversion model on isolated ion 0
|
|
Use Ricardo-Gerardo pair production model 0
|
|
Livermore data directory epics_2017
|
|
=======================================================================
|
|
====== Ionisation Parameters ========
|
|
=======================================================================
|
|
Step function for e+- (0.2, 1 mm)
|
|
Step function for muons/hadrons (0.2, 0.1 mm)
|
|
Step function for light ions (0.2, 0.1 mm)
|
|
Step function for general ions (0.2, 0.1 mm)
|
|
Lowest e+e- kinetic energy 1 keV
|
|
Lowest muon/hadron kinetic energy 1 keV
|
|
Use ICRU90 data 0
|
|
Fluctuations of dE/dx are enabled 1
|
|
Type of fluctuation model for leptons and hadrons Urban
|
|
Use built-in Birks satuaration 0
|
|
Build CSDA range enabled 0
|
|
Use cut as a final range enabled 0
|
|
Enable angular generator interface 0
|
|
Max kinetic energy for CSDA tables 1 GeV
|
|
Max kinetic energy for NIEL computation 0 eV
|
|
Linear loss limit 0.01
|
|
Read data from file for e+e- pair production by mu 0
|
|
=======================================================================
|
|
====== Multiple Scattering Parameters ========
|
|
=======================================================================
|
|
Type of msc step limit algorithm for e+- 1
|
|
Type of msc step limit algorithm for muons/hadrons 0
|
|
Msc lateral displacement for e+- enabled 1
|
|
Msc lateral displacement for muons and hadrons 0
|
|
Urban msc model lateral displacement alg96 1
|
|
Range factor for msc step limit for e+- 0.04
|
|
Range factor for msc step limit for muons/hadrons 0.2
|
|
Geometry factor for msc step limitation of e+- 2.5
|
|
Safety factor for msc step limit for e+- 0.6
|
|
Skin parameter for msc step limitation of e+- 1
|
|
Lambda limit for msc step limit for e+- 1 mm
|
|
Use Mott correction for e- scattering 0
|
|
Factor used for dynamic computation of angular
|
|
limit between single and multiple scattering 1
|
|
Fixed angular limit between single
|
|
and multiple scattering 3.1416 rad
|
|
Upper energy limit for e+- multiple scattering 100 MeV
|
|
Type of electron single scattering model 0
|
|
Type of nuclear form-factor 1
|
|
Screening factor 1
|
|
=======================================================================
|
|
|
|
phot: for gamma SubType=12 BuildTable=0
|
|
LambdaPrime table from 200 keV to 100 TeV in 61 bins
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
LivermorePhElectric : Emin= 0 eV Emax= 100 TeV SauterGavrila Fluo
|
|
|
|
compt: for gamma SubType=13 BuildTable=1
|
|
Lambda table from 100 eV to 1 MeV, 7 bins/decade, spline: 1
|
|
LambdaPrime table from 1 MeV to 100 TeV in 56 bins
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
Klein-Nishina : Emin= 0 eV Emax= 100 TeV
|
|
|
|
conv: for gamma SubType=14 BuildTable=1
|
|
Lambda table from 1.022 MeV to 100 TeV, 18 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
BetheHeitlerLPM : Emin= 0 eV Emax= 100 TeV ModifiedTsai
|
|
|
|
Rayl: for gamma SubType=11 BuildTable=1
|
|
Lambda table from 100 eV to 150 keV, 7 bins/decade, spline: 0
|
|
LambdaPrime table from 150 keV to 100 TeV in 62 bins
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
LivermoreRayleigh : Emin= 0 eV Emax= 100 TeV CullenGenerator
|
|
|
|
msc: for e- SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV
|
|
StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm
|
|
WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV
|
|
StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm
|
|
|
|
eIoni: for e- XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
MollerBhabha : Emin= 0 eV Emax= 100 TeV
|
|
|
|
eBrem: for e- XStype:3 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai
|
|
eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai
|
|
|
|
CoulombScat: for e- XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 100 MeV Emax= 100 TeV
|
|
|
|
msc: for e+ SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV
|
|
StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm
|
|
WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV
|
|
StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm
|
|
|
|
eIoni: for e+ XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
MollerBhabha : Emin= 0 eV Emax= 100 TeV
|
|
|
|
eBrem: for e+ XStype:3 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai
|
|
eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai
|
|
|
|
annihil: for e+ XStype:2 SubType=5 AtRestModel:Simple BuildTable=0
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eplus2gg : Emin= 0 eV Emax= 100 TeV
|
|
|
|
CoulombScat: for e+ XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 100 MeV Emax= 100 TeV
|
|
|
|
msc: for proton SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
hIoni: for proton XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
Bragg : Emin= 0 eV Emax= 2 MeV
|
|
BetheBloch : Emin= 2 MeV Emax= 100 TeV
|
|
|
|
hBrems: for proton XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
hPairProd: for proton XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 17x1001 from 7.50618 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for proton XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for GenericIon SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
UrbanMsc : Emin= 0 eV Emax= 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
ionIoni: for GenericIon XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.02
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
Bragg : Emin= 0 eV Emax= 2 MeV
|
|
BetheBloch : Emin= 2 MeV Emax= 100 TeV
|
|
|
|
msc: for alpha SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
UrbanMsc : Emin= 0 eV Emax= 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
ionIoni: for alpha XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.02
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
BraggIon : Emin= 0 eV Emax=7.9452 MeV
|
|
BetheBloch : Emin=7.9452 MeV Emax= 100 TeV
|
|
|
|
msc: for anti_proton SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
hIoni: for anti_proton XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
ICRU73QO : Emin= 0 eV Emax= 2 MeV
|
|
BetheBloch : Emin= 2 MeV Emax= 100 TeV
|
|
|
|
hBrems: for anti_proton XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
hPairProd: for anti_proton XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 17x1001 from 7.50618 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for anti_proton XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for kaon+ SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
hIoni: for kaon+ XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
Bragg : Emin= 0 eV Emax=1.05231 MeV
|
|
BetheBloch : Emin=1.05231 MeV Emax= 100 TeV
|
|
|
|
hBrems: for kaon+ XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
hPairProd: for kaon+ XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 18x1001 from 3.94942 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for kaon+ XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for kaon- SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
hIoni: for kaon- XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
ICRU73QO : Emin= 0 eV Emax=1.05231 MeV
|
|
BetheBloch : Emin=1.05231 MeV Emax= 100 TeV
|
|
|
|
hBrems: for kaon- XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
hPairProd: for kaon- XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 18x1001 from 3.94942 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for kaon- XStype:1 SubType=1 BuildTable=1
|
|
Used Lambda table of kaon+
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for mu+ SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
muIoni: for mu+ XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
Bragg : Emin= 0 eV Emax= 200 keV
|
|
MuBetheBloch : Emin= 200 keV Emax= 100 TeV
|
|
|
|
muBrems: for mu+ XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
muPairProd: for mu+ XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 21x1001 from 0.85 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for mu+ XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for mu- SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
muIoni: for mu- XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
ICRU73QO : Emin= 0 eV Emax= 200 keV
|
|
MuBetheBloch : Emin= 200 keV Emax= 100 TeV
|
|
|
|
muBrems: for mu- XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
muPairProd: for mu- XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 21x1001 from 0.85 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for mu- XStype:1 SubType=1 BuildTable=1
|
|
Used Lambda table of mu+
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for pi+ SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
hIoni: for pi+ XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
Bragg : Emin= 0 eV Emax=297.505 keV
|
|
BetheBloch : Emin=297.505 keV Emax= 100 TeV
|
|
|
|
hBrems: for pi+ XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
hPairProd: for pi+ XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 20x1001 from 1.11656 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for pi+ XStype:1 SubType=1 BuildTable=1
|
|
Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
msc: for pi- SubType= 10
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV
|
|
StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm
|
|
|
|
hIoni: for pi- XStype:1 SubType=2
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
ICRU73QO : Emin= 0 eV Emax=297.505 keV
|
|
BetheBloch : Emin=297.505 keV Emax= 100 TeV
|
|
|
|
hBrems: for pi- XStype:1 SubType=3
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
hPairProd: for pi- XStype:1 SubType=4
|
|
dE/dx and range tables from 100 eV to 100 TeV in 84 bins
|
|
Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1
|
|
Sampling table 20x1001 from 1.11656 GeV to 100 TeV
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi
|
|
|
|
CoulombScat: for pi- XStype:1 SubType=1 BuildTable=1
|
|
Used Lambda table of pi+
|
|
ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531
|
|
===== EM models for the G4Region DefaultRegionForTheWorld ======
|
|
eCoulombScattering : Emin= 0 eV Emax= 100 TeV
|
|
|
|
========= Table of registered couples ============================
|
|
|
|
Index : 0 used in the geometry : Yes
|
|
Material : G4_PbWO4
|
|
Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm
|
|
Energy thresholds : gamma 89.5666 keV e- 1.13293 MeV e+ 1.06705 MeV proton 100 keV
|
|
Region(s) which use this couple :
|
|
DefaultRegionForTheWorld
|
|
|
|
==================================================================
|
|
|
|
### Run 0 starts.
|
|
|
|
------- MixMaxRng engine status -------
|
|
Current state vector is:
|
|
mixmax state, file version 1.0
|
|
N=17 V[N]={906770732717044781, 629165745432651234, 1235682547346241386, 68420008233404568, 2262190991329242458, 2266470399991071809, 1976726662926872232, 245458862506414172, 1955974201201518530, 2155248512522080758, 604170912935414061, 1116171330120743511, 1861018313684488333, 1296715403254578286, 1549011045957234151, 370819759640195970, 2230139271784837643} counter= 17sumtot= 1977567618660788324
|
|
---------------------------------------
|
|
|
|
----> Histogram file is opened in testem2.root.
|
|
--> Event 0 starts.
|
|
--> Event 20 starts.
|
|
--> Event 40 starts.
|
|
--> Event 60 starts.
|
|
--> Event 80 starts.
|
|
Run terminated.
|
|
Run Summary
|
|
Number of events processed : 100
|
|
User=1.140000s Real=1.144151s Sys=0.000000s
|
|
LOGITUDINAL PROFILE CUMULATIVE LOGITUDINAL PROFILE
|
|
|
|
bin Mean rms bin Mean rms
|
|
|
|
0.00-> 0.50 radl: 0.19% 0.11% 0-> 0.50 radl: 0.19% 0.11%
|
|
0.50-> 1.00 radl: 0.50% 0.39% 0-> 1.00 radl: 0.69% 0.46%
|
|
1.00-> 1.50 radl: 0.97% 0.51% 0-> 1.50 radl: 1.67% 0.90%
|
|
1.50-> 2.00 radl: 1.65% 0.81% 0-> 2.00 radl: 3.31% 1.60%
|
|
2.00-> 2.50 radl: 2.38% 1.09% 0-> 2.50 radl: 5.70% 2.55%
|
|
2.50-> 3.00 radl: 3.12% 1.35% 0-> 3.00 radl: 8.82% 3.72%
|
|
3.00-> 3.50 radl: 3.93% 1.52% 0-> 3.50 radl: 12.76% 5.02%
|
|
3.50-> 4.00 radl: 4.55% 1.57% 0-> 4.00 radl: 17.31% 6.28%
|
|
4.00-> 4.50 radl: 5.24% 1.59% 0-> 4.50 radl: 22.55% 7.40%
|
|
4.50-> 5.00 radl: 5.60% 1.41% 0-> 5.00 radl: 28.15% 8.28%
|
|
5.00-> 5.50 radl: 5.96% 1.32% 0-> 5.50 radl: 34.10% 8.87%
|
|
5.50-> 6.00 radl: 5.90% 1.25% 0-> 6.00 radl: 40.01% 9.40%
|
|
6.00-> 6.50 radl: 5.91% 1.24% 0-> 6.50 radl: 45.92% 9.73%
|
|
6.50-> 7.00 radl: 5.41% 1.07% 0-> 7.00 radl: 51.33% 9.84%
|
|
7.00-> 7.50 radl: 4.96% 1.04% 0-> 7.50 radl: 56.29% 9.67%
|
|
7.50-> 8.00 radl: 4.58% 1.06% 0-> 8.00 radl: 60.87% 9.40%
|
|
8.00-> 8.50 radl: 4.14% 0.93% 0-> 8.50 radl: 65.00% 9.13%
|
|
8.50-> 9.00 radl: 3.84% 1.04% 0-> 9.00 radl: 68.84% 8.54%
|
|
9.00-> 9.50 radl: 3.48% 0.98% 0-> 9.50 radl: 72.32% 8.02%
|
|
9.50->10.00 radl: 3.16% 0.89% 0->10.00 radl: 75.48% 7.46%
|
|
10.00->10.50 radl: 2.79% 0.99% 0->10.50 radl: 78.26% 6.78%
|
|
10.50->11.00 radl: 2.39% 0.97% 0->11.00 radl: 80.66% 6.08%
|
|
11.00->11.50 radl: 2.13% 0.85% 0->11.50 radl: 82.79% 5.55%
|
|
11.50->12.00 radl: 1.89% 0.79% 0->12.00 radl: 84.67% 5.07%
|
|
12.00->12.50 radl: 1.56% 0.71% 0->12.50 radl: 86.23% 4.62%
|
|
12.50->13.00 radl: 1.38% 0.64% 0->13.00 radl: 87.61% 4.18%
|
|
13.00->13.50 radl: 1.21% 0.54% 0->13.50 radl: 88.82% 3.83%
|
|
13.50->14.00 radl: 1.04% 0.51% 0->14.00 radl: 89.86% 3.46%
|
|
14.00->14.50 radl: 0.91% 0.52% 0->14.50 radl: 90.77% 3.09%
|
|
14.50->15.00 radl: 0.76% 0.46% 0->15.00 radl: 91.53% 2.73%
|
|
15.00->15.50 radl: 0.71% 0.41% 0->15.50 radl: 92.24% 2.45%
|
|
15.50->16.00 radl: 0.59% 0.38% 0->16.00 radl: 92.83% 2.18%
|
|
16.00->16.50 radl: 0.48% 0.30% 0->16.50 radl: 93.31% 2.02%
|
|
16.50->17.00 radl: 0.38% 0.27% 0->17.00 radl: 93.69% 1.87%
|
|
17.00->17.50 radl: 0.37% 0.28% 0->17.50 radl: 94.06% 1.70%
|
|
17.50->18.00 radl: 0.30% 0.27% 0->18.00 radl: 94.36% 1.51%
|
|
18.00->18.50 radl: 0.24% 0.21% 0->18.50 radl: 94.60% 1.40%
|
|
18.50->19.00 radl: 0.21% 0.21% 0->19.00 radl: 94.81% 1.26%
|
|
19.00->19.50 radl: 0.19% 0.17% 0->19.50 radl: 95.00% 1.16%
|
|
19.50->20.00 radl: 0.17% 0.18% 0->20.00 radl: 95.17% 1.05%
|
|
|
|
|
|
|
|
RADIAL PROFILE CUMULATIVE RADIAL PROFILE
|
|
|
|
bin Mean rms bin Mean rms
|
|
|
|
0.00-> 0.10 radl: 17.63% 1.63% 0-> 0.10 radl: 17.63% 1.63%
|
|
0.10-> 0.20 radl: 13.25% 1.16% 0-> 0.20 radl: 30.89% 2.20%
|
|
0.20-> 0.30 radl: 9.86% 1.04% 0-> 0.30 radl: 40.74% 2.39%
|
|
0.30-> 0.40 radl: 7.73% 0.85% 0-> 0.40 radl: 48.48% 2.41%
|
|
0.40-> 0.50 radl: 6.02% 0.80% 0-> 0.50 radl: 54.50% 2.32%
|
|
0.50-> 0.60 radl: 4.95% 0.70% 0-> 0.60 radl: 59.45% 2.26%
|
|
0.60-> 0.70 radl: 4.07% 0.64% 0-> 0.70 radl: 63.51% 2.20%
|
|
0.70-> 0.80 radl: 3.31% 0.52% 0-> 0.80 radl: 66.83% 2.07%
|
|
0.80-> 0.90 radl: 2.80% 0.50% 0-> 0.90 radl: 69.62% 1.91%
|
|
0.90-> 1.00 radl: 2.36% 0.47% 0-> 1.00 radl: 71.98% 1.87%
|
|
1.00-> 1.10 radl: 2.01% 0.36% 0-> 1.10 radl: 73.99% 1.78%
|
|
1.10-> 1.20 radl: 1.84% 0.40% 0-> 1.20 radl: 75.83% 1.72%
|
|
1.20-> 1.30 radl: 1.58% 0.40% 0-> 1.30 radl: 77.41% 1.63%
|
|
1.30-> 1.40 radl: 1.42% 0.31% 0-> 1.40 radl: 78.83% 1.59%
|
|
1.40-> 1.50 radl: 1.29% 0.29% 0-> 1.50 radl: 80.11% 1.60%
|
|
1.50-> 1.60 radl: 1.11% 0.24% 0-> 1.60 radl: 81.22% 1.57%
|
|
1.60-> 1.70 radl: 1.03% 0.26% 0-> 1.70 radl: 82.25% 1.54%
|
|
1.70-> 1.80 radl: 0.95% 0.26% 0-> 1.80 radl: 83.19% 1.48%
|
|
1.80-> 1.90 radl: 0.90% 0.25% 0-> 1.90 radl: 84.09% 1.42%
|
|
1.90-> 2.00 radl: 0.83% 0.23% 0-> 2.00 radl: 84.92% 1.39%
|
|
2.00-> 2.10 radl: 0.74% 0.20% 0-> 2.10 radl: 85.66% 1.36%
|
|
2.10-> 2.20 radl: 0.71% 0.20% 0-> 2.20 radl: 86.37% 1.32%
|
|
2.20-> 2.30 radl: 0.64% 0.22% 0-> 2.30 radl: 87.01% 1.30%
|
|
2.30-> 2.40 radl: 0.60% 0.18% 0-> 2.40 radl: 87.61% 1.28%
|
|
2.40-> 2.50 radl: 0.56% 0.15% 0-> 2.50 radl: 88.17% 1.26%
|
|
2.50-> 2.60 radl: 0.52% 0.15% 0-> 2.60 radl: 88.70% 1.22%
|
|
2.60-> 2.70 radl: 0.51% 0.16% 0-> 2.70 radl: 89.21% 1.21%
|
|
2.70-> 2.80 radl: 0.47% 0.14% 0-> 2.80 radl: 89.68% 1.20%
|
|
2.80-> 2.90 radl: 0.43% 0.14% 0-> 2.90 radl: 90.11% 1.21%
|
|
2.90-> 3.00 radl: 0.43% 0.14% 0-> 3.00 radl: 90.54% 1.20%
|
|
3.00-> 3.10 radl: 0.37% 0.12% 0-> 3.10 radl: 90.91% 1.18%
|
|
3.10-> 3.20 radl: 0.34% 0.12% 0-> 3.20 radl: 91.25% 1.17%
|
|
3.20-> 3.30 radl: 0.33% 0.12% 0-> 3.30 radl: 91.58% 1.16%
|
|
3.30-> 3.40 radl: 0.31% 0.13% 0-> 3.40 radl: 91.89% 1.16%
|
|
3.40-> 3.50 radl: 0.32% 0.13% 0-> 3.50 radl: 92.21% 1.14%
|
|
3.50-> 3.60 radl: 0.28% 0.12% 0-> 3.60 radl: 92.49% 1.15%
|
|
3.60-> 3.70 radl: 0.26% 0.11% 0-> 3.70 radl: 92.75% 1.13%
|
|
3.70-> 3.80 radl: 0.26% 0.11% 0-> 3.80 radl: 93.01% 1.12%
|
|
3.80-> 3.90 radl: 0.23% 0.09% 0-> 3.90 radl: 93.24% 1.13%
|
|
3.90-> 4.00 radl: 0.23% 0.10% 0-> 4.00 radl: 93.47% 1.13%
|
|
4.00-> 4.10 radl: 0.22% 0.10% 0-> 4.10 radl: 93.69% 1.12%
|
|
4.10-> 4.20 radl: 0.20% 0.08% 0-> 4.20 radl: 93.89% 1.10%
|
|
4.20-> 4.30 radl: 0.20% 0.09% 0-> 4.30 radl: 94.09% 1.10%
|
|
4.30-> 4.40 radl: 0.19% 0.09% 0-> 4.40 radl: 94.28% 1.09%
|
|
4.40-> 4.50 radl: 0.17% 0.08% 0-> 4.50 radl: 94.45% 1.08%
|
|
4.50-> 4.60 radl: 0.17% 0.08% 0-> 4.60 radl: 94.62% 1.07%
|
|
4.60-> 4.70 radl: 0.16% 0.09% 0-> 4.70 radl: 94.78% 1.07%
|
|
4.70-> 4.80 radl: 0.15% 0.07% 0-> 4.80 radl: 94.93% 1.06%
|
|
4.80-> 4.90 radl: 0.14% 0.06% 0-> 4.90 radl: 95.06% 1.06%
|
|
4.90-> 5.00 radl: 0.11% 0.06% 0-> 5.00 radl: 95.17% 1.05%
|
|
|
|
===== SUMMARY =====
|
|
|
|
Total number of events: 100
|
|
Mean number of charged steps: 7282.30
|
|
Mean number of neutral steps: 4129.76
|
|
|
|
energy deposit : 95.17 % E0 +- 1.05 % E0
|
|
charged traklen: 485.17 radl +- 5.33 radl
|
|
neutral traklen: 4234.20 radl +- 137.47 radl
|
|
|
|
90.00 % confinement: radius = 2.87 radl (2.56 cm )
|
|
|
|
|
|
<<<<ACCEPTANCE>>>> 100 events for Total Energy in Absorber
|
|
Edep: 0.951731 delEdep= 0.00273084 nrms= 3.33029
|
|
Erms: 0.0104885 delErms= 0.00228851 nrms= 2.79087
|
|
<<<<END>>>> IS NOT ACCEPTED
|
|
|
|
|
|
------- MixMaxRng engine status -------
|
|
Current state vector is:
|
|
mixmax state, file version 1.0
|
|
N=17 V[N]={1398845600007675958, 668479405224017148, 1983933737211562293, 1412120036313625423, 1337744427355291499, 760986330337380472, 80325672388640921, 1819653083881006092, 1132830951630036280, 778023537716595151, 2262839309974581669, 1878387213102408022, 1615122050315780633, 290768350164185196, 589013399592900989, 1103856972128193763, 332547298556216580} counter= 13sumtot= 998733302190546481
|
|
---------------------------------------
|
|
... write file : testem2.root - done
|
|
... close file : testem2.root - done
|
|
... clear all data - done
|
|
================== Deleting memory pools ===================
|
|
Number of memory pools allocated: 9 of which, static: 0
|
|
Dynamic pools deleted: 9 / Total memory freed: 0.064 MB
|
|
============================================================
|