Environment variable "G4FORCE_RUN_MANAGER_TYPE" enabled with value == Serial. Forcing G4RunManager type... ############################################ !!! WARNING - FPE detection is activated !!! ############################################ ################################ !!! G4Backtrace is activated !!! ################################ ************************************************************** Geant4 version Name: geant4-11-02-patch-01 (16-February-2024) Copyright : Geant4 Collaboration References : NIM A 506 (2003), 250-303 : IEEE-TNS 53 (2006), 270-278 : NIM A 835 (2016), 186-225 WWW : http://geant4.org/ ************************************************************** <<< Geant4 Physics List simulation engine: FTFP_BERT Visualization Manager instantiating with verbosity "warnings (3)"... Visualization Manager initialising... Registering graphics systems... You have successfully registered the following graphics systems. Registered graphics systems are: ASCIITree (ATree) DAWNFILE (DAWNFILE) G4HepRepFile (HepRepFile) RayTracer (RayTracer) VRML2FILE (VRML2FILE) gMocrenFile (gMocrenFile) TOOLSSG_OFFSCREEN (TSG_OFFSCREEN) TOOLSSG_OFFSCREEN (TSG_OFFSCREEN, TSG_FILE) OpenGLImmediateQt (OGLIQt, OGLI) OpenGLStoredQt (OGLSQt, OGL, OGLS) OpenGLImmediateXm (OGLIXm, OGLIQt_FALLBACK) OpenGLStoredXm (OGLSXm, OGLSQt_FALLBACK) OpenGLImmediateX (OGLIX, OGLIQt_FALLBACK, OGLIXm_FALLBACK) OpenGLStoredX (OGLSX, OGLSQt_FALLBACK, OGLSXm_FALLBACK) RayTracerX (RayTracerX) Qt3D (Qt3D) TOOLSSG_X11_GLES (TSG_X11_GLES, TSGX11, TSG_XT_GLES_FALLBACK) TOOLSSG_XT_GLES (TSG_XT_GLES, TSGXt, TSG_QT_GLES_FALLBACK) TOOLSSG_XT_ZB (TSG_XT_ZB, TSGXtZB) TOOLSSG_QT_GLES (TSG_QT_GLES, TSGQt, TSG) TOOLSSG_QT_ZB (TSG_QT_ZB, TSGQtZB) Default graphics system is: TSG_OFFSCREEN (based on batch session). Default window size hint is: 600x600-0+0 (based on G4VisManager initialisation). Note: Parameters specified on the command line will override these defaults. Use "vis/open" without parameters to get these defaults. Registering model factories... You have successfully registered the following model factories. Registered model factories: generic drawByAttribute drawByCharge drawByOriginVolume drawByParticleID drawByEncounteredVolume Registered models: None Registered filter factories: attributeFilter chargeFilter originVolumeFilter particleFilter encounteredVolumeFilter Registered filters: None You have successfully registered the following user vis actions. Run Duration User Vis Actions: none End of Event User Vis Actions: none End of Run User Vis Actions: none Some /vis commands (optionally) take a string to specify colour. "/vis/list" to see available colours. ***** Table : Nb of materials = 3 ***** Material: G4_Pb density: 11.350 g/cm3 RadL: 5.613 mm Nucl.Int.Length: 18.248 cm Imean: 823.000 eV temperature: 293.15 K pressure: 1.00 atm ---> Element: Pb (Pb) Z = 82.0 N = 207 A = 207.217 g/mole ---> Isotope: Pb204 Z = 82 N = 204 A = 203.97 g/mole abundance: 1.400 % ---> Isotope: Pb206 Z = 82 N = 206 A = 205.97 g/mole abundance: 24.100 % ---> Isotope: Pb207 Z = 82 N = 207 A = 206.98 g/mole abundance: 22.100 % ---> Isotope: Pb208 Z = 82 N = 208 A = 207.98 g/mole abundance: 52.400 % ElmMassFraction: 100.00 % ElmAbundance 100.00 % Material: liquidArgon density: 1.390 g/cm3 RadL: 14.064 cm Nucl.Int.Length: 86.076 cm Imean: 188.000 eV temperature: 293.15 K pressure: 1.00 atm ---> Element: Ar (Ar) Z = 18.0 N = 40 A = 39.948 g/mole ---> Isotope: Ar36 Z = 18 N = 36 A = 35.97 g/mole abundance: 0.337 % ---> Isotope: Ar38 Z = 18 N = 38 A = 37.96 g/mole abundance: 0.063 % ---> Isotope: Ar40 Z = 18 N = 40 A = 39.96 g/mole abundance: 99.600 % ElmMassFraction: 100.00 % ElmAbundance 100.00 % Material: Galactic density: 0.000 mg/cm3 RadL: 204310098.490 pc Nucl.Int.Length: 113427284.261 pc Imean: 19.200 eV temperature: 2.73 K pressure: 0.00 atm ---> Element: H (H) Z = 1.0 N = 1 A = 1.008 g/mole ---> Isotope: H1 Z = 1 N = 1 A = 1.01 g/mole abundance: 99.989 % ---> Isotope: H2 Z = 1 N = 2 A = 2.01 g/mole abundance: 0.011 % ElmMassFraction: 100.00 % ElmAbundance 100.00 % Checking overlaps for volume Calorimeter:0 (G4Box) ... OK! Checking overlaps for volume Abso:0 (G4Box) ... OK! Checking overlaps for volume Gap:0 (G4Box) ... OK! ------------------------------------------------------------ ---> The calorimeter is 10 layers of: [ 10mm of G4_Pb + 5mm of liquidArgon ] ------------------------------------------------------------ hInelastic FTFP_BERT : threshold between BERT and FTFP is over the interval for pions : 3 to 6 GeV for kaons : 3 to 6 GeV for proton : 3 to 6 GeV for neutron : 3 to 6 GeV ### Adding tracking cuts for neutron TimeCut(ns)= 10000 KinEnergyCut(MeV)= 0 ======================================================================= ====== Electromagnetic Physics Parameters ======== ======================================================================= LPM effect enabled 1 Enable creation and use of sampling tables 0 Apply cuts on all EM processes 0 Use combined TransportationWithMsc Disabled Use general process 1 Enable linear polarisation for gamma 0 Enable photoeffect sampling below K-shell 1 Enable sampling of quantum entanglement 0 X-section factor for integral approach 0.8 Min kinetic energy for tables 100 eV Max kinetic energy for tables 100 TeV Number of bins per decade of a table 7 Verbose level 1 Verbose level for worker thread 0 Bremsstrahlung energy threshold above which primary e+- is added to the list of secondary 100 TeV Bremsstrahlung energy threshold above which primary muon/hadron is added to the list of secondary 100 TeV Lowest triplet kinetic energy 1 MeV Enable sampling of gamma linear polarisation 0 5D gamma conversion model type 0 5D gamma conversion model on isolated ion 0 Livermore data directory epics_2017 ======================================================================= ====== Ionisation Parameters ======== ======================================================================= Step function for e+- (0.2, 1 mm) Step function for muons/hadrons (0.2, 0.1 mm) Step function for light ions (0.2, 0.1 mm) Step function for general ions (0.2, 0.1 mm) Lowest e+e- kinetic energy 1 keV Lowest muon/hadron kinetic energy 1 keV Use ICRU90 data 0 Fluctuations of dE/dx are enabled 1 Type of fluctuation model for leptons and hadrons Urban Use built-in Birks satuaration 0 Build CSDA range enabled 0 Use cut as a final range enabled 0 Enable angular generator interface 0 Max kinetic energy for CSDA tables 1 GeV Max kinetic energy for NIEL computation 0 eV Linear loss limit 0.01 Read data from file for e+e- pair production by mu 0 ======================================================================= ====== Multiple Scattering Parameters ======== ======================================================================= Type of msc step limit algorithm for e+- 1 Type of msc step limit algorithm for muons/hadrons 0 Msc lateral displacement for e+- enabled 1 Msc lateral displacement for muons and hadrons 0 Urban msc model lateral displacement alg96 1 Range factor for msc step limit for e+- 0.04 Range factor for msc step limit for muons/hadrons 0.2 Geometry factor for msc step limitation of e+- 2.5 Safety factor for msc step limit for e+- 0.6 Skin parameter for msc step limitation of e+- 1 Lambda limit for msc step limit for e+- 1 mm Use Mott correction for e- scattering 0 Factor used for dynamic computation of angular limit between single and multiple scattering 1 Fixed angular limit between single and multiple scattering 3.1416 rad Upper energy limit for e+- multiple scattering 100 MeV Type of electron single scattering model 0 Type of nuclear form-factor 1 Screening factor 1 ======================================================================= phot: for gamma SubType=12 BuildTable=0 LambdaPrime table from 200 keV to 100 TeV in 61 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermorePhElectric : Emin= 0 eV Emax= 100 TeV SauterGavrila Fluo compt: for gamma SubType=13 BuildTable=1 Lambda table from 100 eV to 1 MeV, 7 bins/decade, spline: 1 LambdaPrime table from 1 MeV to 100 TeV in 56 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== Klein-Nishina : Emin= 0 eV Emax= 100 TeV conv: for gamma SubType=14 BuildTable=1 Lambda table from 1.022 MeV to 100 TeV, 18 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BetheHeitlerLPM : Emin= 0 eV Emax= 100 TeV ModifiedTsai Rayl: for gamma SubType=11 BuildTable=1 Lambda table from 100 eV to 150 keV, 7 bins/decade, spline: 0 LambdaPrime table from 150 keV to 100 TeV in 62 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermoreRayleigh : Emin= 0 eV Emax= 100 TeV CullenGenerator msc: for e- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV eBrem: for e- XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai CoulombScat: for e- XStype:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV msc: for e+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV eBrem: for e+ XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai annihil: for e+ XStype:2 SubType=5 BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eplus2gg : Emin= 0 eV Emax= 100 TeV CoulombScat: for e+ XStype:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV msc: for proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for proton XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV hBrems: for proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001 from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for proton XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for GenericIon SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm ionIoni: for GenericIon XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV msc: for alpha SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm ionIoni: for alpha XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax=7.9452 MeV BetheBloch : Emin=7.9452 MeV Emax= 100 TeV msc: for anti_proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for anti_proton XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV hBrems: for anti_proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for anti_proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001 from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for anti_proton XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for kaon+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV hBrems: for kaon+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001 from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for kaon- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV hBrems: for kaon- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001 from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon- XStype:1 SubType=1 BuildTable=1 Used Lambda table of kaon+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm muIoni: for mu+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 200 keV MuBetheBloch : Emin= 200 keV Emax= 100 TeV muBrems: for mu+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001 from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm muIoni: for mu- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 200 keV MuBetheBloch : Emin= 200 keV Emax= 100 TeV muBrems: for mu- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001 from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu- XStype:1 SubType=1 BuildTable=1 Used Lambda table of mu+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for pi+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV hBrems: for pi+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001 from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for pi- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV hBrems: for pi- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001 from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi- XStype:1 SubType=1 BuildTable=1 Used Lambda table of pi+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ==================================================================== HADRONIC PROCESSES SUMMARY (verbose level 1) ----------------------------------------------------------------------- Hadronic Processes for neutron Process: hadElastic Model: hElasticCHIPS: 0 eV ---> 100 TeV Cr_sctns: G4NeutronElasticXS: 0 eV ---> 100 TeV Process: neutronInelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: G4NeutronInelasticXS: 0 eV ---> 100 TeV Process: nCapture Model: nRadCapture: 0 eV ---> 100 TeV Cr_sctns: G4NeutronCaptureXS: 0 eV ---> 100 TeV Process: nKiller ----------------------------------------------------------------------- Hadronic Processes for B- Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: B-Inelastic Model: FTFP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for D- Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: D-Inelastic Model: FTFP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for GenericIon Process: ionInelastic Model: Binary Light Ion Cascade: 0 eV /n ---> 6 GeV/n Model: FTFP: 3 GeV/n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV ----------------------------------------------------------------------- Hadronic Processes for He3 Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV Process: He3Inelastic Model: Binary Light Ion Cascade: 0 eV /n ---> 6 GeV/n Model: FTFP: 3 GeV/n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV ----------------------------------------------------------------------- Hadronic Processes for alpha Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV Process: alphaInelastic Model: Binary Light Ion Cascade: 0 eV /n ---> 6 GeV/n Model: FTFP: 3 GeV/n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV ----------------------------------------------------------------------- Hadronic Processes for anti_He3 Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100.1 MeV/n Model: AntiAElastic: 100 MeV/n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: anti_He3Inelastic Model: FTFP: 0 eV /n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for anti_alpha Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100.1 MeV/n Model: AntiAElastic: 100 MeV/n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: anti_alphaInelastic Model: FTFP: 0 eV /n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for anti_deuteron Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100.1 MeV/n Model: AntiAElastic: 100 MeV/n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: anti_deuteronInelastic Model: FTFP: 0 eV /n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: hFritiofCaptureAtRest ------------------------------------------------------------------------- Hadronic Processes for anti_hypertriton Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for anti_lambda Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: anti_lambdaInelastic Model: FTFP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for anti_neutron Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100.1 MeV Model: AntiAElastic: 100 MeV ---> 100 TeV Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: anti_neutronInelastic Model: FTFP: 0 eV ---> 100 TeV Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for anti_proton Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100.1 MeV Model: AntiAElastic: 100 MeV ---> 100 TeV Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: anti_protonInelastic Model: FTFP: 0 eV ---> 100 TeV Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for anti_triton Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100.1 MeV/n Model: AntiAElastic: 100 MeV/n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: anti_tritonInelastic Model: FTFP: 0 eV /n ---> 100 TeV/n Cr_sctns: AntiAGlauber: 0 eV ---> 25.6 PeV Process: hFritiofCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for deuteron Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV Process: dInelastic Model: Binary Light Ion Cascade: 0 eV /n ---> 6 GeV/n Model: FTFP: 3 GeV/n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV ----------------------------------------------------------------------- Hadronic Processes for e+ Process: positronNuclear Model: G4ElectroVDNuclearModel: 0 eV ---> 1 PeV Cr_sctns: ElectroNuclearXS: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for e- Process: electronNuclear Model: G4ElectroVDNuclearModel: 0 eV ---> 1 PeV Cr_sctns: ElectroNuclearXS: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for gamma Process: photonNuclear Model: GammaNPreco: 0 eV ---> 200 MeV Model: BertiniCascade: 199 MeV ---> 6 GeV Model: TheoFSGenerator: 3 GeV ---> 100 TeV Cr_sctns: GammaNuclearXS: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for kaon+ Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: kaon+Inelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for kaon- Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: kaon-Inelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: hBertiniCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for lambda Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: lambdaInelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for mu+ Process: muonNuclear Model: G4MuonVDNuclearModel: 0 eV ---> 1 PeV Cr_sctns: KokoulinMuonNuclearXS: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for mu- Process: muonNuclear Model: G4MuonVDNuclearModel: 0 eV ---> 1 PeV Cr_sctns: KokoulinMuonNuclearXS: 0 eV ---> 100 TeV Process: muMinusCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for pi+ Process: hadElastic Model: hElasticGlauber: 0 eV ---> 100 TeV Cr_sctns: BarashenkovGlauberGribov: 0 eV ---> 100 TeV Process: pi+Inelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: BarashenkovGlauberGribov: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for pi- Process: hadElastic Model: hElasticGlauber: 0 eV ---> 100 TeV Cr_sctns: BarashenkovGlauberGribov: 0 eV ---> 100 TeV Process: pi-Inelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: BarashenkovGlauberGribov: 0 eV ---> 100 TeV Process: hBertiniCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for proton Process: hadElastic Model: hElasticCHIPS: 0 eV ---> 100 TeV Cr_sctns: BarashenkovGlauberGribov: 0 eV ---> 100 TeV Process: protonInelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: BarashenkovGlauberGribov: 0 eV ---> 100 TeV ----------------------------------------------------------------------- Hadronic Processes for sigma- Process: hadElastic Model: hElasticLHEP: 0 eV ---> 100 TeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: sigma-Inelastic Model: FTFP: 3 GeV ---> 100 TeV Model: BertiniCascade: 0 eV ---> 6 GeV Cr_sctns: Glauber-Gribov: 0 eV ---> 100 TeV Process: hBertiniCaptureAtRest ----------------------------------------------------------------------- Hadronic Processes for triton Process: hadElastic Model: hElasticLHEP: 0 eV /n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV Process: tInelastic Model: Binary Light Ion Cascade: 0 eV /n ---> 6 GeV/n Model: FTFP: 3 GeV/n ---> 100 TeV/n Cr_sctns: Glauber-Gribov Nucl-nucl: 0 eV ---> 25.6 PeV ======================================================================= ====== Geant4 Native Pre-compound Model Parameters ======== ======================================================================= Type of pre-compound inverse x-section 3 Pre-compound model active 1 Pre-compound excitation low energy 100 keV Pre-compound excitation high energy 30 MeV Angular generator for pre-compound model 1 Use NeverGoBack option for pre-compound model 0 Use SoftCutOff option for pre-compound model 0 Use CEM transitions for pre-compound model 1 Use GNASH transitions for pre-compound model 0 Use HETC submodel for pre-compound model 0 ======================================================================= ====== Nuclear De-excitation Module Parameters ======== ======================================================================= Type of de-excitation inverse x-section 3 Type of de-excitation factory Evaporation+GEM Number of de-excitation channels 68 Min excitation energy 10 eV Min energy per nucleon for multifragmentation 200 GeV Limit excitation energy for Fermi BreakUp 20 MeV Level density (1/MeV) 0.075 Use simple level density model 1 Use discrete excitation energy of the residual 1 Time limit for long lived isomeres 1 ns Isomer production flag 1 Internal e- conversion flag 1 Store e- internal conversion data 0 Correlated gamma emission flag 0 Max 2J for sampling of angular correlations 10 ======================================================================= G4VisManager: Using G4TrajectoryDrawByCharge as fallback trajectory model. See commands in /vis/modeling/trajectories/ for other options. ### Run 0 starts. -------- WWWW ------- G4Exception-START -------- WWWW ------- *** G4Exception : Analysis_W001 issued by : G4RootNtupleFileManager::SetNtupleMergingMode Merging ntuples is not applicable in sequential application. Setting was ignored. *** This is just a warning message. *** -------- WWWW -------- G4Exception-END --------- WWWW ------- ... set ntuple merging row mode : row-wise - done ... create file : B4.root - done ... open analysis file : B4.root - done ... open analysis file : B4.root - done Using --> Event 0 starts. Absorber: total energy: 265.781 MeV total track length: 19.326 cm Gap: total energy: 21.0561 MeV total track length: 10.6454 cm --> End of event: 0 ----> print histograms statistic for the entire run EAbs : mean = 265.781 MeV rms = 0 eV EGap : mean = 21.0561 MeV rms = 0 eV LAbs : mean = 19.326 cm rms = 0 fm LGap : mean = 10.6454 cm rms = 0 fm ... write file : B4.root - done ... close file : B4.root - done There are histograms that can be viewed with visualization: 4 h1 histograms(s) List them with "/analysis/list". View them immediately with "/vis/plot" or "/vis/reviewPlots". But...there are no entries. To make your histograms available for plotting in this UI session, use CloseFile(false) in your EndOfRunAction and Reset() in your BeginOfRunAction. Transportation, GammaGeneralProc, msc, eIoni eBrem, CoulombScat, msc, eIoni eBrem, annihil, CoulombScat, msc ionIoni, msc, muIoni, muBrems muPairProd, CoulombScat, muIoni, msc hIoni, hBrems, hPairProd, CoulombScat hIoni, msc, hIoni, hBrems hPairProd, CoulombScat, hIoni, msc hIoni, hBrems, hPairProd, CoulombScat msc, hIoni, CoulombScat, hIoni hIoni, msc, ionIoni, msc ionIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, hIoni hIoni, hIoni, hIoni, electronNuclear positronNuclear, muonNuclear, Decay, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, hadElastic hadElastic, hadElastic, hadElastic, neutronInelastic nCapture, protonInelastic, pi+Inelastic, pi-Inelastic kaon+Inelastic, kaon-Inelastic, kaon0LInelastic, kaon0SInelastic anti_protonInelastic,anti_neutronInelastic,anti_deuteronInelastic,anti_tritonInelastic anti_He3Inelastic,anti_alphaInelastic, lambdaInelastic, sigma+Inelastic sigma-Inelastic, xi0Inelastic, xi-Inelastic, omega-Inelastic anti_lambdaInelastic,anti_sigma+Inelastic,anti_sigma-Inelastic, anti_xi0Inelastic anti_xi-Inelastic,anti_omega-Inelastic, D+Inelastic, D0Inelastic D-Inelastic, anti_D0Inelastic, Ds+Inelastic, Ds-Inelastic B+Inelastic, B0Inelastic, B-Inelastic, anti_B0Inelastic Bs0Inelastic, anti_Bs0Inelastic, Bc+Inelastic, Bc-Inelastic lambda_c+Inelastic, xi_c+Inelastic, xi_c0Inelastic, omega_c0Inelastic lambda_bInelastic, xi_b0Inelastic, xi_b-Inelastic, omega_b-Inelastic anti_lambda_c+Inelastic,anti_xi_c+Inelastic,anti_xi_c0Inelastic,anti_omega_c0Inelastic anti_lambda_bInelastic,anti_xi_b0Inelastic,anti_xi_b-Inelastic,anti_omega_b-Inelastic hFritiofCaptureAtRest,hBertiniCaptureAtRest,muMinusCaptureAtRest, dInelastic tInelastic, He3Inelastic, alphaInelastic, ionInelastic nKiller ### Run 1 starts. ... create file : B4.root - done ... open analysis file : B4.root - done ... open analysis file : B4.root - done Using --> Event 0 starts. Absorber: total energy: 273.124 MeV total track length: 20.1646 cm Gap: total energy: 16.2656 MeV total track length: 7.73372 cm --> End of event: 0 ----> print histograms statistic for the entire run EAbs : mean = 273.124 MeV rms = 0 eV EGap : mean = 16.2656 MeV rms = 0 eV LAbs : mean = 20.1646 cm rms = 0 fm LGap : mean = 7.73372 cm rms = 0 fm ... write file : B4.root - done ... close file : B4.root - done There are histograms that can be viewed with visualization: 4 h1 histograms(s) List them with "/analysis/list". View them immediately with "/vis/plot" or "/vis/reviewPlots". But...there are no entries. To make your histograms available for plotting in this UI session, use CloseFile(false) in your EndOfRunAction and Reset() in your BeginOfRunAction. ### Run 2 starts. ... create file : B4.root - done ... open analysis file : B4.root - done ... open analysis file : B4.root - done Using --> Event 0 starts. Absorber: total energy: 465.716 MeV total track length: 34.0047 cm Gap: total energy: 15.1463 MeV total track length: 7.88173 cm --> End of event: 0 ----> print histograms statistic for the entire run EAbs : mean = 0 eV rms = 0 eV EGap : mean = 15.1463 MeV rms = 0 eV LAbs : mean = 34.0047 cm rms = 0 fm LGap : mean = 7.88173 cm rms = 0 fm ... write file : B4.root - done ... close file : B4.root - done There are histograms that can be viewed with visualization: 4 h1 histograms(s) List them with "/analysis/list". View them immediately with "/vis/plot" or "/vis/reviewPlots". But...there are no entries. To make your histograms available for plotting in this UI session, use CloseFile(false) in your EndOfRunAction and Reset() in your BeginOfRunAction. Graphics systems deleted. Visualization Manager deleting...