############################################ !!! WARNING - FPE detection is activated !!! ############################################ ################################ !!! G4Backtrace is activated !!! ################################ ************************************************************** Geant4 version Name: geant4-11-04-patch-01 (13-March-2026) Copyright : Geant4 Collaboration References : NIM A 506 (2003), 250-303 : IEEE-TNS 53 (2006), 270-278 : NIM A 835 (2016), 186-225 WWW : http://geant4.org/ ************************************************************** DetectorSimpleALICE setup Material is selected: Air Material is selected: Mylar Material is selected: Xe15CO2 The WORLD is made of 4000mm of Air, the transverse size (R) of the world is 200 mm. The ABSORBER is made of 38.3mm of Xe15CO2, the transverse size (R) is 100 mm. Z position of the (middle of the) absorber 293.401 mm. radZ = 129.58 mm startZ = 100 mm fRadThick = 59.16 mm fFoilNumber = 220 fRadiatorMat = radiatorMat WorldMaterial = Air TransitionRadiationPhysics: XTR model ### G4VXTRenergyLoss: the number of TR radiator plates = 220 total radiator thickness = 5.94 cm plate material = Mylar gas material = Air plate plasma energy = 24.5068 eV gas plasma energy = 0.731967 eV Regular transparent X-ray TR radiator EM process is called ======================================================================= ====== Electromagnetic Physics Parameters ======== ======================================================================= LPM effect enabled 1 Enable creation and use of sampling tables 0 Apply cuts on all EM processes 0 Use combined TransportationWithMsc Disabled Use general process 1 Enable linear polarisation for gamma 0 Enable photoeffect sampling below K-shell 1 Enable sampling of quantum entanglement 0 X-section factor for integral approach 0.8 Min kinetic energy for tables 100 eV Max kinetic energy for tables 100 TeV Number of bins per decade of a table 7 Verbose level 1 Verbose level for worker thread 0 Bremsstrahlung energy threshold above which primary e+- is added to the list of secondary 100 TeV Bremsstrahlung energy threshold above which primary muon/hadron is added to the list of secondary 100 TeV Positron annihilation at rest model SimplePositronium Enable 3 gamma annihilation on fly 0 Lowest triplet kinetic energy 1 MeV Enable sampling of gamma linear polarisation 0 5D gamma conversion model type 0 5D gamma conversion model on isolated ion 0 Use RiGe 5D e+e- pair production model by muons 0 Livermore data directory epics_2017 ======================================================================= ====== Ionisation Parameters ======== ======================================================================= Step function for e+- (0.2, 1 mm) Step function for muons/hadrons (0.2, 0.1 mm) Step function for light ions (0.2, 0.1 mm) Step function for general ions (0.2, 0.1 mm) Lowest e+e- kinetic energy 1 keV Lowest muon/hadron kinetic energy 1 keV Use ICRU90 data 0 Fluctuations of dE/dx are enabled 1 Type of fluctuation model for leptons and hadrons Urban Use built-in Birks saturation 0 Build CSDA range enabled 0 Use cut as a final range enabled 0 Enable angular generator interface 0 Max kinetic energy for CSDA tables 1 GeV Max kinetic energy for NIEL computation 0 eV Linear loss limit 0.01 Read data from file for e+e- pair production by mu 0 ======================================================================= ====== Multiple Scattering Parameters ======== ======================================================================= Type of msc step limit algorithm for e+- 1 Type of msc step limit algorithm for muons/hadrons 0 Msc lateral displacement for e+- enabled 1 Msc lateral displacement for muons and hadrons 0 Urban msc model lateral displacement alg96 1 Range factor for msc step limit for e+- 0.04 Range factor for msc step limit for muons/hadrons 0.2 Geometry factor for msc step limitation of e+- 2.5 Safety factor for msc step limit for e+- 0.6 Skin parameter for msc step limitation of e+- 1 Lambda limit for msc step limit for e+- 1 mm Use Mott correction for e- scattering 0 Factor used for dynamic computation of angular limit between single and multiple scattering 1 Fixed angular limit between single and multiple scattering 3.1416 rad Upper energy limit for e+- multiple scattering 100 MeV Type of electron single scattering model 0 Type of nuclear form-factor 1 Screening factor 1 ======================================================================= phot: for gamma SubType=12 BuildTable=0 LambdaPrime table from 200 keV to 100 TeV in 61 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermorePhElectric : Emin= 0 eV Emax= 100 TeV SauterGavrila Fluo compt: for gamma SubType=13 BuildTable=1 Lambda table from 100 eV to 1 MeV, 7 bins/decade, spline: 1 LambdaPrime table from 1 MeV to 100 TeV in 56 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== Klein-Nishina : Emin= 0 eV Emax= 100 TeV conv: for gamma SubType=14 BuildTable=1 Lambda table from 1.022 MeV to 100 TeV, 18 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BetheHeitlerLPM : Emin= 0 eV Emax= 100 TeV ModifiedTsai Rayl: for gamma SubType=11 BuildTable=1 Lambda table from 100 eV to 150 keV, 7 bins/decade, spline: 0 LambdaPrime table from 150 keV to 100 TeV in 62 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermoreRayleigh : Emin= 0 eV Emax= 100 TeV CullenGenerator msc: for e- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV eBrem: for e- XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai CoulombScat: for e- XStype:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV Lorentz Factor XTR photon number 107.6 0.0003515 123.4 0.0006258 141.5 0.001078 162.3 0.001513 186.2 0.002883 213.7 0.004692 245.2 0.006086 281.3 0.009628 322.9 0.01835 370.5 0.03094 425.3 0.04305 488.2 0.05194 560.3 0.06382 643.2 0.08559 738.3 0.1271 847.6 0.1977 973 0.3108 1117 0.4511 1282 0.5944 1472 0.7401 1690 1.109 1940 1.51 2228 1.864 2558 2.156 2936 2.39 3371 2.573 3871 2.713 4444 2.82 5102 2.9 5858 2.962 6726 3.008 7722 3.044 8866 3.071 1.018e+04 3.091 1.169e+04 3.106 1.342e+04 3.118 1.541e+04 3.127 1.769e+04 3.134 2.031e+04 3.139 2.332e+04 3.143 2.677e+04 3.146 3.074e+04 3.148 3.529e+04 3.15 4.052e+04 3.151 4.652e+04 3.152 5.342e+04 3.153 6.133e+04 3.153 7.042e+04 3.154 8.085e+04 3.154 9.283e+04 3.154 total time for build X-ray TR energy loss tables = 0.17 s Build angle for energy distribution according the current radiator total time for build X-ray TR angle for energy loss tables = 0.75 s msc: for e+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV eBrem: for e+ XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai annihil: for e+ XStype:2 SubType=5 AtRestModel:Simple BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eplus2gg : Emin= 0 eV Emax= 100 TeV CoulombScat: for e+ XStype:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV Lorentz Factor XTR photon number 107.6 0.0003515 123.4 0.0006258 141.5 0.001078 162.3 0.001513 186.2 0.002883 213.7 0.004692 245.2 0.006086 281.3 0.009628 322.9 0.01835 370.5 0.03094 425.3 0.04305 488.2 0.05194 560.3 0.06382 643.2 0.08559 738.3 0.1271 847.6 0.1977 973 0.3108 1117 0.4511 1282 0.5944 1472 0.7401 1690 1.109 1940 1.51 2228 1.864 2558 2.156 2936 2.39 3371 2.573 3871 2.713 4444 2.82 5102 2.9 5858 2.962 6726 3.008 7722 3.044 8866 3.071 1.018e+04 3.091 1.169e+04 3.106 1.342e+04 3.118 1.541e+04 3.127 1.769e+04 3.134 2.031e+04 3.139 2.332e+04 3.143 2.677e+04 3.146 3.074e+04 3.148 3.529e+04 3.15 4.052e+04 3.151 4.652e+04 3.152 5.342e+04 3.153 6.133e+04 3.153 7.042e+04 3.154 8.085e+04 3.154 9.283e+04 3.154 total time for build X-ray TR energy loss tables = 0.17 s Build angle for energy distribution according the current radiator total time for build X-ray TR angle for energy loss tables = 0.74 s msc: for proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for proton XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV hBrems: for proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001, from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for proton XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for GenericIon SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm ionIoni: for GenericIon XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV msc: for alpha SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm ionIoni: for alpha XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax=7.9452 MeV BetheBloch : Emin=7.9452 MeV Emax= 100 TeV msc: for anti_proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for anti_proton XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV hBrems: for anti_proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for anti_proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001, from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for anti_proton XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for kaon+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV hBrems: for kaon+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001, from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for kaon- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV hBrems: for kaon- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001, from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon- XStype:1 SubType=1 BuildTable=1 Used Lambda table of kaon+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm muIoni: for mu+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 200 keV MuBetheBloch : Emin= 200 keV Emax= 100 TeV muBrems: for mu+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001, from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm muIoni: for mu- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 200 keV MuBetheBloch : Emin= 200 keV Emax= 100 TeV muBrems: for mu- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001, from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu- XStype:1 SubType=1 BuildTable=1 Used Lambda table of mu+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for pi+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV hBrems: for pi+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001, from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for pi- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV hBrems: for pi- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001, from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi- XStype:1 SubType=1 BuildTable=1 Used Lambda table of pi+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ========= Table of registered couples ============================ Index : 0 used in the geometry : Yes Material : Air Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 990 eV e- 990 eV e+ 990 eV proton 100 keV Region(s) which use this couple : DefaultRegionForTheWorld Index : 1 used in the geometry : Yes Material : radiatorMat Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 1.07729 keV e- 83.3623 keV e+ 82.2462 keV proton 100 keV Region(s) which use this couple : XTRradiator Index : 2 used in the geometry : Yes Material : Xe15CO2 Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 990 eV e- 1.91069 keV e+ 1.87057 keV proton 100 keV Region(s) which use this couple : XTRdEdxDetector ================================================================== ### Run 0 starts. ### Run 0 start. --------- Ranecu engine status --------- Initial seed (index) = 0 Current couple of seeds = 9876, 54321 ---------------------------------------- ... set ntuple merging row mode : row-wise - done ... create file : testem10.root - done ... open analysis file : testem10.root - done ... open analysis file : testem10.root - done --> Event 0 starts. Run terminated. Run Summary Number of events processed : 1000 User=0.110000s Real=0.150231s Sys=0.000000s ================== run summary ===================== End of Run TotNbofEvents = 1000 Mean energy deposit in absorber = 0.0479535 +-0.0189569 MeV Total number of XTR gammas = 2664 Total number of all gammas = 2755 --------- Ranecu engine status --------- Initial seed (index) = 0 Current couple of seeds = 2144070945, 143970008 ---------------------------------------- ... write file : testem10.root - done ... close file : testem10.root - done ================== Deleting memory pools =================== Number of memory pools allocated: 10 of which, static: 0 Dynamic pools deleted: 10 / Total memory freed: 0.043 MB ============================================================