Environment variable "G4FORCE_RUN_MANAGER_TYPE" enabled with value == Serial. Forcing G4RunManager type... ############################################ !!! WARNING - FPE detection is activated !!! ############################################ ################################ !!! G4Backtrace is activated !!! ################################ ************************************************************** Geant4 version Name: geant4-11-04-patch-01 (13-March-2026) Copyright : Geant4 Collaboration References : NIM A 506 (2003), 250-303 : IEEE-TNS 53 (2006), 270-278 : NIM A 835 (2016), 186-225 WWW : http://geant4.org/ ************************************************************** PhysicsList::AddPhysicsList: G4NIELCalculator: is created with the model /control/cout/ignoreThreadsExcept 0 /run/numberOfThreads 2 *** /run/numberOfThreads command is issued in sequential mode. Command is ignored. /run/verbose 1 # /testem/det/setMat Aluminium /testem/det/setSize 10 m # /process/em/verbose 0 /testem/phys/addPhysics emstandard_opt0 PhysicsList::AddPhysicsList: ###/testem/phys/addPhysics local # /run/setCut 1 mm # /run/initialize The Box is 10 m of Aluminium Material: Aluminium density: 2.700 g/cm3 RadL: 8.893 cm Nucl.Int.Length: 38.880 cm Imean: 166.000 eV temperature: 293.15 K pressure: 1.00 atm ---> Element: Al (Al) Z = 13.0 N = 27 A = 26.982 g/mole ---> Isotope: Al27 Z = 13 N = 27 A = 26.98 g/mole abundance: 100.000 % ElmMassFraction: 100.00 % ElmAbundance 100.00 % GetProcess : RadioactiveDecay /process/em/printParameters ======================================================================= ====== Electromagnetic Physics Parameters ======== ======================================================================= LPM effect enabled 1 Enable creation and use of sampling tables 0 Apply cuts on all EM processes 0 Use combined TransportationWithMsc Disabled Use general process 0 Enable linear polarisation for gamma 0 Enable photoeffect sampling below K-shell 1 Enable sampling of quantum entanglement 0 X-section factor for integral approach 0.8 Min kinetic energy for tables 100 eV Max kinetic energy for tables 100 TeV Number of bins per decade of a table 7 Verbose level 1 Verbose level for worker thread 0 Bremsstrahlung energy threshold above which primary e+- is added to the list of secondary 100 TeV Bremsstrahlung energy threshold above which primary muon/hadron is added to the list of secondary 100 TeV Positron annihilation at rest model SimplePositronium Enable 3 gamma annihilation on fly 0 Lowest triplet kinetic energy 1 MeV Enable sampling of gamma linear polarisation 0 5D gamma conversion model type 0 5D gamma conversion model on isolated ion 0 Use RiGe 5D e+e- pair production model by muons 0 Livermore data directory epics_2017 ======================================================================= ====== Ionisation Parameters ======== ======================================================================= Step function for e+- (0.2, 1 mm) Step function for muons/hadrons (0.2, 0.1 mm) Step function for light ions (0.2, 0.1 mm) Step function for general ions (0.2, 0.1 mm) Lowest e+e- kinetic energy 1 keV Lowest muon/hadron kinetic energy 1 keV Use ICRU90 data 0 Fluctuations of dE/dx are enabled 1 Type of fluctuation model for leptons and hadrons Urban Use built-in Birks saturation 0 Build CSDA range enabled 1 Use cut as a final range enabled 0 Enable angular generator interface 0 Max kinetic energy for CSDA tables 1 GeV Max kinetic energy for NIEL computation 0 eV Linear loss limit 0.01 Read data from file for e+e- pair production by mu 0 ======================================================================= ====== Multiple Scattering Parameters ======== ======================================================================= Type of msc step limit algorithm for e+- 1 Type of msc step limit algorithm for muons/hadrons 0 Msc lateral displacement for e+- enabled 1 Msc lateral displacement for muons and hadrons 0 Urban msc model lateral displacement alg96 1 Range factor for msc step limit for e+- 0.04 Range factor for msc step limit for muons/hadrons 0.2 Geometry factor for msc step limitation of e+- 2.5 Safety factor for msc step limit for e+- 0.6 Skin parameter for msc step limitation of e+- 1 Lambda limit for msc step limit for e+- 1 mm Use Mott correction for e- scattering 0 Factor used for dynamic computation of angular limit between single and multiple scattering 1 Fixed angular limit between single and multiple scattering 3.1416 rad Upper energy limit for e+- multiple scattering 100 MeV Type of electron single scattering model 0 Type of nuclear form-factor 1 Screening factor 1 ======================================================================= # ##/globalField/setValue 0 0 5 tesla # /testem/gun/setDefault /gun/particle e- /gun/energy 100 MeV # /run/printProgress 200 /run/beamOn 2000 ======================================================================= ====== Electromagnetic Physics Parameters ======== ======================================================================= LPM effect enabled 1 Enable creation and use of sampling tables 0 Apply cuts on all EM processes 0 Use combined TransportationWithMsc Disabled Use general process 0 Enable linear polarisation for gamma 0 Enable photoeffect sampling below K-shell 1 Enable sampling of quantum entanglement 0 X-section factor for integral approach 0.8 Min kinetic energy for tables 100 eV Max kinetic energy for tables 100 TeV Number of bins per decade of a table 7 Verbose level 1 Verbose level for worker thread 0 Bremsstrahlung energy threshold above which primary e+- is added to the list of secondary 100 TeV Bremsstrahlung energy threshold above which primary muon/hadron is added to the list of secondary 100 TeV Positron annihilation at rest model SimplePositronium Enable 3 gamma annihilation on fly 0 Lowest triplet kinetic energy 1 MeV Enable sampling of gamma linear polarisation 0 5D gamma conversion model type 0 5D gamma conversion model on isolated ion 0 Use RiGe 5D e+e- pair production model by muons 0 Livermore data directory epics_2017 ======================================================================= ====== Ionisation Parameters ======== ======================================================================= Step function for e+- (0.2, 1 mm) Step function for muons/hadrons (0.2, 0.1 mm) Step function for light ions (0.2, 0.1 mm) Step function for general ions (0.2, 0.1 mm) Lowest e+e- kinetic energy 1 keV Lowest muon/hadron kinetic energy 1 keV Use ICRU90 data 0 Fluctuations of dE/dx are enabled 1 Type of fluctuation model for leptons and hadrons Urban Use built-in Birks saturation 0 Build CSDA range enabled 1 Use cut as a final range enabled 0 Enable angular generator interface 0 Max kinetic energy for CSDA tables 1 GeV Max kinetic energy for NIEL computation 0 eV Linear loss limit 0.01 Read data from file for e+e- pair production by mu 0 ======================================================================= ====== Multiple Scattering Parameters ======== ======================================================================= Type of msc step limit algorithm for e+- 1 Type of msc step limit algorithm for muons/hadrons 0 Msc lateral displacement for e+- enabled 1 Msc lateral displacement for muons and hadrons 0 Urban msc model lateral displacement alg96 1 Range factor for msc step limit for e+- 0.04 Range factor for msc step limit for muons/hadrons 0.2 Geometry factor for msc step limitation of e+- 2.5 Safety factor for msc step limit for e+- 0.6 Skin parameter for msc step limitation of e+- 1 Lambda limit for msc step limit for e+- 1 mm Use Mott correction for e- scattering 0 Factor used for dynamic computation of angular limit between single and multiple scattering 1 Fixed angular limit between single and multiple scattering 3.1416 rad Upper energy limit for e+- multiple scattering 100 MeV Type of electron single scattering model 0 Type of nuclear form-factor 1 Screening factor 1 ======================================================================= phot: for gamma SubType=12 BuildTable=0 LambdaPrime table from 200 keV to 100 TeV in 61 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermorePhElectric : Emin= 0 eV Emax= 100 TeV SauterGavrila Fluo compt: for gamma SubType=13 BuildTable=1 Lambda table from 100 eV to 1 MeV, 7 bins/decade, spline: 1 LambdaPrime table from 1 MeV to 100 TeV in 56 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== Klein-Nishina : Emin= 0 eV Emax= 100 TeV conv: for gamma SubType=14 BuildTable=1 Lambda table from 1.022 MeV to 100 TeV, 18 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BetheHeitlerLPM : Emin= 0 eV Emax= 100 TeV ModifiedTsai Rayl: for gamma SubType=11 BuildTable=1 Lambda table from 100 eV to 150 keV, 7 bins/decade, spline: 0 LambdaPrime table from 150 keV to 100 TeV in 62 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermoreRayleigh : Emin= 0 eV Emax= 100 TeV CullenGenerator msc: for e- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e- XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins eBrem: for e- XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai CoulombScat: for e- XStype:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV msc: for e+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e+ XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins eBrem: for e+ XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai annihil: for e+ XStype:2 SubType=5 AtRestModel:Simple BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eplus2gg : Emin= 0 eV Emax= 100 TeV CoulombScat: for e+ XStype:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV msc: for proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for proton XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins hBrems: for proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001, from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for proton XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for GenericIon SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm ionIoni: for GenericIon XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins ====================================================================== ====== Radioactive Decay Physics Parameters ======= ====================================================================== min MeanLife (from G4NuclideTable) 1 ps Max life time (from G4DeexPrecoParameters) 1 ns Internal e- conversion flag 1 Stored internal conversion coefficients 1 Enabled atomic relaxation mode 0 Enable correlated gamma emission 0 Max 2J for sampling of angular correlations 10 Atomic de-excitation enabled 0 Auger electron emission enabled 0 Check EM cuts disabled for atomic de-excitation 0 Use Bearden atomic level energies 0 Use ANSTO fluorescence model 0 Threshold for very long decay time at rest 1 y ====================================================================== ==================================================================== HADRONIC PROCESSES SUMMARY (verbose level 1) ------------------------------------------------------------------------- Hadronic Processes for GenericIon Process: RadioactiveDecay msc: for alpha SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm ionIoni: for alpha XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax=7.9452 MeV BetheBloch : Emin=7.9452 MeV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins msc: for anti_proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for anti_proton XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins hBrems: for anti_proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for anti_proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001, from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for anti_proton XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for kaon+ XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins hBrems: for kaon+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001, from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for kaon- XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins hBrems: for kaon- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001, from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon- XStype:1 SubType=1 BuildTable=1 Used Lambda table of kaon+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm muIoni: for mu+ XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 200 keV MuBetheBloch : Emin= 200 keV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins muBrems: for mu+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001, from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm muIoni: for mu- XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 200 keV MuBetheBloch : Emin= 200 keV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins muBrems: for mu- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001, from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu- XStype:1 SubType=1 BuildTable=1 Used Lambda table of mu+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for pi+ XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins hBrems: for pi+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001, from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi+ XStype:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 0 ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:0 Skin=1 Llim=1 mm hIoni: for pi- XStype:1 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV CSDA range table up to 1 GeV in 49 bins hBrems: for pi- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001, from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi- XStype:1 SubType=1 BuildTable=1 Used Lambda table of pi+ ThetaMin(p) < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ========= Table of registered couples ============================ Index : 0 used in the geometry : Yes Material : Aluminium Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 6.91818 keV e- 597.629 keV e+ 574.329 keV proton 100 keV Region(s) which use this couple : DefaultRegionForTheWorld ================================================================== ### Run 0 starts. ------- MixMaxRng engine status ------- Current state vector is: mixmax state, file version 1.0 N=17 V[N]={906770732717044781, 629165745432651234, 1235682547346241386, 68420008233404568, 2262190991329242458, 2266470399991071809, 1976726662926872232, 245458862506414172, 1955974201201518530, 2155248512522080758, 604170912935414061, 1116171330120743511, 1861018313684488333, 1296715403254578286, 1549011045957234151, 370819759640195970, 2230139271784837643} counter= 17sumtot= 1977567618660788324 --------------------------------------- --> Event 0 starts. --> Event 200 starts. --> Event 400 starts. --> Event 600 starts. --> Event 800 starts. --> Event 1000 starts. --> Event 1200 starts. --> Event 1400 starts. --> Event 1600 starts. --> Event 1800 starts. Run terminated. Run Summary Number of events processed : 2000 User=0.600000s Real=0.601292s Sys=0.000000s ======================== run summary ====================== The run is: 2000 e- of 100 MeV through 10 m of Aluminium (density: 2.7 g/cm3 ) Energy deposit: 99.825 MeV Energy leakage: 174.7 keV Edep + Eleak: 100 MeV NIEL energy calculated: 0 eV Nb tracks/event neutral: 25.233 charged: 136.96 Nb steps/event neutral: 139.22 charged: 202.53 Process calls frequency : CoulombScat= 1 Rayl= 17841 Transportation= 1744 annihil= 2770 compt= 210126 conv= 2756 eBrem= 46093 eIoni= 356088 msc= 105 phot= 45970 --------------------------------------------------------- Primary particle : true Range = 11.195 cm rms = 3.8373 cm proj Range = 9.7421 cm rms = 3.5666 cm proj/true = 0.87022 transverse dispersion at end = 1.6174 cm mass true Range from simulation = 30.226 g/cm2 from PhysicsTable (csda range) = 32.101 g/cm2 --------------------------------------------------------- ------- MixMaxRng engine status ------- Current state vector is: mixmax state, file version 1.0 N=17 V[N]={2204704700215511942, 1704475241333781852, 1152036325638390116, 382284643487265242, 908284428552197266, 1844649111230106554, 716434537514665914, 2181596265840606189, 1797085839663638694, 2000987945612039860, 153649884734446175, 197968976667762189, 1479286561913217005, 666748462381689408, 1012181014210310564, 2222020765206517576, 226539335501886528} counter= 17sumtot= 98346956780787515 --------------------------------------- # /gun/particle proton /run/beamOn 2000 ========= Table of registered couples ============================ Index : 0 used in the geometry : Yes Material : Aluminium Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 6.91818 keV e- 597.629 keV e+ 574.329 keV proton 100 keV Region(s) which use this couple : DefaultRegionForTheWorld ================================================================== ### Run 1 starts. ------- MixMaxRng engine status ------- Current state vector is: mixmax state, file version 1.0 N=17 V[N]={2204704700215511942, 1704475241333781852, 1152036325638390116, 382284643487265242, 908284428552197266, 1844649111230106554, 716434537514665914, 2181596265840606189, 1797085839663638694, 2000987945612039860, 153649884734446175, 197968976667762189, 1479286561913217005, 666748462381689408, 1012181014210310564, 2222020765206517576, 226539335501886528} counter= 17sumtot= 98346956780787515 --------------------------------------- --> Event 0 starts. --> Event 200 starts. --> Event 400 starts. --> Event 600 starts. --> Event 800 starts. --> Event 1000 starts. --> Event 1200 starts. --> Event 1400 starts. --> Event 1600 starts. --> Event 1800 starts. Run terminated. Run Summary Number of events processed : 2000 User=0.030000s Real=0.033664s Sys=0.000000s ======================== run summary ====================== The run is: 2000 proton of 100 MeV through 10 m of Aluminium (density: 2.7 g/cm3 ) Energy deposit: 100 MeV Energy leakage: 0 eV Edep + Eleak: 100 MeV NIEL energy calculated: 167.38 eV Nb tracks/event neutral: 0 charged: 1.011 Nb steps/event neutral: 0 charged: 19.074 Process calls frequency : CoulombScat= 45 NoProcess= 22 hIoni= 38059 ionIoni= 22 --------------------------------------------------------- Primary particle : true Range = 3.7132 cm rms = 407.22 um proj Range = 3.705 cm rms = 420.14 um proj/true = 0.99779 transverse dispersion at end = 1.1181 mm mass true Range from simulation = 10.026 g/cm2 from PhysicsTable (csda range) = 10.012 g/cm2 --------------------------------------------------------- ------- MixMaxRng engine status ------- Current state vector is: mixmax state, file version 1.0 N=17 V[N]={1120886391458240773, 1168661967546458364, 965130051979669458, 1225466068298067703, 635493586742307257, 1739073022758069151, 1048870775384294139, 1820979206692573380, 1053163655585474045, 1824939031300577365, 299889952524606006, 1538375319653973701, 814383766236139394, 1947653451662752991, 1672162330603756087, 1391486027223531346, 738332628840072452} counter= 6sumtot= 252360151567318053 --------------------------------------- # ================== Deleting memory pools =================== Number of memory pools allocated: 9 of which, static: 0 Dynamic pools deleted: 9 / Total memory freed: 0.035 MB ============================================================