Environment variable "G4FORCE_RUN_MANAGER_TYPE" enabled with value == Serial. Forcing G4RunManager type... ############################################ !!! WARNING - FPE detection is activated !!! ############################################ ################################ !!! G4Backtrace is activated !!! ################################ ************************************************************** Geant4 version Name: geant4-11-04-patch-01 (13-March-2026) Copyright : Geant4 Collaboration References : NIM A 506 (2003), 250-303 : IEEE-TNS 53 (2006), 270-278 : NIM A 835 (2016), 186-225 WWW : http://geant4.org/ ************************************************************** Visualization Manager instantiating with verbosity "warnings (3)"... Visualization Manager initialising... Registering graphics systems... You have successfully registered the following graphics systems. Registered graphics systems are: ASCIITree (ATree) DAWNFILE (DAWNFILE) RayTracer (RT) VRML2FILE (VRML2FILE) gMocrenFile (gMocrenFile) TOOLSSG_OFFSCREEN (TSG_OFFSCREEN, TSG_FILE) OpenGLImmediateQt (OGLIQt, OGLI) OpenGLStoredQt (OGLSQt, OGLS) OpenGLImmediateXm (OGLIXm, OGLIQt_FALLBACK) OpenGLStoredXm (OGLSXm, OGLSQt_FALLBACK) OpenGLImmediateX (OGLIX, OGLIQt_FALLBACK, OGLIXm_FALLBACK) OpenGLStoredX (OGLSX, OGLSQt_FALLBACK, OGLSXm_FALLBACK) RayTracerX (RTX) RayTracerQt (RTQt) TOOLSSG_X11_GLES (TSG_X11_GLES, TSGX11, TSG_XT_GLES_FALLBACK) TOOLSSG_X11_ZB (TSG_X11_ZB, TSGX11ZB) TOOLSSG_XT_GLES (TSG_XT_GLES, TSGXt, TSG_QT_GLES_FALLBACK) TOOLSSG_XT_ZB (TSG_XT_ZB, TSGXtZB) TOOLSSG_QT_GLES (TSG_QT_GLES, TSGQt, TSG, OGL) TOOLSSG_QT_ZB (TSG_QT_ZB, TSGQtZB, TSGZB) You may choose a graphics system (driver) with a parameter of the command "/vis/open" or "/vis/sceneHandler/create", or you may omit the driver parameter and choose at run time: - by argument in the construction of G4VisExecutive - by environment variable "G4VIS_DEFAULT_DRIVER" - by entry in "~/.g4session" - by build flags. - Note: This feature is not allowed in batch mode. For further information see "examples/basic/B1/exampleB1.cc" and "vis.mac". Registering model factories... You have successfully registered the following model factories. Registered model factories: generic drawByAttribute drawByCharge drawByOriginVolume drawByParticleID drawByEncounteredVolume Registered models: None Registered filter factories: attributeFilter chargeFilter originVolumeFilter particleFilter encounteredVolumeFilter Registered filters: None You have successfully registered the following user vis actions. Run Duration User Vis Actions: none End of Event User Vis Actions: none End of Run User Vis Actions: none Some /vis commands (optionally) take a string to specify colour. "/vis/list" to see available colours. PhysicsList::AddPhysicsList: X - Defining SpacePhysics, no hadronic part ---> Using G4EmStandard_SpacePhysics v. 11.03 Build geometry from GDML file: pores.gdml G4GDML: Reading 'pores.gdml'... G4GDML: Reading definitions... G4GDML: Reading materials... G4GDML: Reading solids... G4GDML: Reading structure... G4GDML: Reading setup... G4GDML: Reading 'pores.gdml' done! Stripping off GDML names of materials, solids and volumes ... Adding volumes to the InnerRegion ======================================================================= ====== Electromagnetic Physics Parameters ======== ======================================================================= LPM effect enabled 1 Enable creation and use of sampling tables 0 Apply cuts on all EM processes 0 Use combined TransportationWithMsc Disabled Use general process 0 Enable linear polarisation for gamma 0 Enable photoeffect sampling below K-shell 1 Enable sampling of quantum entanglement 0 X-section factor for integral approach 0.8 Min kinetic energy for tables 100 eV Max kinetic energy for tables 100 TeV Number of bins per decade of a table 20 Verbose level 1 Verbose level for worker thread 0 Bremsstrahlung energy threshold above which primary e+- is added to the list of secondary 100 TeV Bremsstrahlung energy threshold above which primary muon/hadron is added to the list of secondary 100 TeV Positron annihilation at rest model SimplePositronium Enable 3 gamma annihilation on fly 0 Lowest triplet kinetic energy 1 MeV Enable sampling of gamma linear polarisation 0 5D gamma conversion model type 0 5D gamma conversion model on isolated ion 0 Use RiGe 5D e+e- pair production model by muons 0 Livermore data directory epics_2017 ======================================================================= ====== Ionisation Parameters ======== ======================================================================= Step function for e+- (0.2, 0.01 mm) Step function for muons/hadrons (0.05, 1e-05 mm) Step function for light ions (0.1, 0.02 mm) Step function for general ions (0.1, 0.001 mm) Lowest e+e- kinetic energy 50 eV Lowest muon/hadron kinetic energy 1 keV Use ICRU90 data 1 Fluctuations of dE/dx are enabled 1 Type of fluctuation model for leptons and hadrons Universal Use built-in Birks saturation 0 Build CSDA range enabled 1 Use cut as a final range enabled 0 Enable angular generator interface 1 Max kinetic energy for CSDA tables 1 GeV Max kinetic energy for NIEL computation 1 MeV Linear loss limit 0.01 Read data from file for e+e- pair production by mu 0 ======================================================================= ====== Multiple Scattering Parameters ======== ======================================================================= Type of msc step limit algorithm for e+- 2 Type of msc step limit algorithm for muons/hadrons 0 Msc lateral displacement for e+- enabled 1 Msc lateral displacement for muons and hadrons 1 Urban msc model lateral displacement alg96 1 Range factor for msc step limit for e+- 0.08 Range factor for msc step limit for muons/hadrons 0.2 Geometry factor for msc step limitation of e+- 2.5 Safety factor for msc step limit for e+- 0.6 Skin parameter for msc step limitation of e+- 3 Lambda limit for msc step limit for e+- 1 mm Use Mott correction for e- scattering 1 Factor used for dynamic computation of angular limit between single and multiple scattering 1 Fixed angular limit between single and multiple scattering 0 rad Upper energy limit for e+- multiple scattering 100 MeV Type of electron single scattering model 0 Type of nuclear form-factor 1 Screening factor 1 ======================================================================= ====== Atomic Deexcitation Parameters ======== ======================================================================= Fluorescence enabled 1 Directory in G4LEDATA for fluorescence data files fluor Auger electron cascade enabled 0 PIXE atomic de-excitation enabled 0 De-excitation module ignores cuts 0 Type of PIXE cross section for hadrons Empirical Type of PIXE cross section for e+- Livermore ======================================================================= ### === Deexcitation model UAtomDeexcitation is activated for 2 regions: DefaultRegionForTheWorld 0 0 0 InnerRegion 1 1 1 ### === Ignore cuts flag: 0 phot: for gamma SubType=12 BuildTable=0 LambdaPrime table from 200 keV to 100 TeV in 174 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermorePhElectric : Emin= 0 eV Emax= 100 TeV SauterGavrila Fluo compt: for gamma SubType=13 BuildTable=1 Lambda table from 100 eV to 1 MeV, 20 bins/decade, spline: 1 LambdaPrime table from 1 MeV to 100 TeV in 160 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LowEPComptonModel : Emin= 0 eV Emax= 20 MeV Fluo KleinNishina : Emin= 20 MeV Emax= 100 TeV Fluo conv: for gamma SubType=14 BuildTable=1 Lambda table from 1.022 MeV to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BetheHeitler5D : Emin= 0 eV Emax= 100 TeV ModifiedTsai Rayl: for gamma SubType=11 BuildTable=1 Lambda table from 100 eV to 150 keV, 20 bins/decade, spline: 0 LambdaPrime table from 150 keV to 100 TeV in 176 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermoreRayleigh : Emin= 0 eV Emax= 100 TeV CullenGenerator msc: for e- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== GoudsmitSaunderson : Emin= 0 eV Emax= 100 MeV Nbins=120 100 eV - 100 MeV StepLim=SafetyPlus Rfact=0.08 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=120 100 MeV - 100 TeV StepLim=SafetyPlus Rfact=0.08 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.2, 0.01 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== LowEnergyIoni : Emin= 0 eV Emax= 100 keV deltaVI MollerBhabha : Emin= 100 keV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins eBrem: for e- XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV AngularGen2BS eBremLPM : Emin= 1 GeV Emax= 100 TeV AngularGen2BS ePairProd: for e- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 0 Sampling table 25x1001 from 0.1 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== ePairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for e- XStype:3 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for e- XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for e+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== GoudsmitSaunderson : Emin= 0 eV Emax= 100 MeV Nbins=120 100 eV - 100 MeV StepLim=SafetyPlus Rfact=0.08 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=120 100 MeV - 100 TeV StepLim=SafetyPlus Rfact=0.08 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm eIoni: for e+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.2, 0.01 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== PenIoni : Emin= 0 eV Emax= 100 keV MollerBhabha : Emin= 100 keV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins eBrem: for e+ XStype:4 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV AngularGen2BS eBremLPM : Emin= 1 GeV Emax= 100 TeV AngularGen2BS ePairProd: for e+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 0 Sampling table 25x1001 from 0.1 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== ePairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi annihil: for e+ XStype:2 SubType=5 AtRestModel:Simple BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eplus2gg : Emin= 0 eV Emax= 100 TeV CoulombScat: for e+ XStype:3 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for e+ XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm hIoni: for proton XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV deltaVI BetheBloch : Emin= 2 MeV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins hBrems: for proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 17x1001, from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for proton XStype:3 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm nuclearStopping: for proton SubType=8 BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU49NucStopping : Emin= 0 eV Emax= 1 MeV SingleCoulombScat: for proton XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for GenericIon SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ionIoni: for GenericIon XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.1, 0.001 mm), integ: 3, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ParamICRU73 : Emin= 0 eV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins nuclearStopping: for GenericIon SubType=8 BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU49NucStopping : Emin= 0 eV Emax= 1 MeV SingleCoulombScat: for GenericIon XStype:2 SubType=1 BuildTable=0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== IonCoulombScattering : Emin= 0 eV Emax= 100 TeV ====================================================================== ====== Radioactive Decay Physics Parameters ======= ====================================================================== min MeanLife (from G4NuclideTable) 1 ns Max life time (from G4DeexPrecoParameters) 1 ns Internal e- conversion flag 1 Stored internal conversion coefficients 1 Enabled atomic relaxation mode 1 Enable correlated gamma emission 0 Max 2J for sampling of angular correlations 10 Atomic de-excitation enabled 1 Auger electron emission enabled 0 Check EM cuts disabled for atomic de-excitation 0 Use Bearden atomic level energies 0 Use ANSTO fluorescence model 0 Threshold for very long decay time at rest 1e+60 y ====================================================================== ==================================================================== HADRONIC PROCESSES SUMMARY (verbose level 1) ------------------------------------------------------------------------- Hadronic Processes for GenericIon Process: RadioactiveDecay msc: for alpha SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ionIoni: for alpha XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.1, 0.02 mm), integ: 3, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax=7.9452 MeV deltaVI BetheBloch : Emin=7.9452 MeV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins nuclearStopping: for alpha SubType=8 BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU49NucStopping : Emin= 0 eV Emax= 1 MeV SingleCoulombScat: for alpha XStype:2 SubType=1 BuildTable=0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== IonCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for anti_proton SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm hIoni: for anti_proton XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 2 MeV deltaVI BetheBloch : Emin= 2 MeV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins hBrems: for anti_proton XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for anti_proton XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 17x1001, from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for anti_proton XStype:3 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for anti_proton XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm hIoni: for kaon+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=1.05231 MeV deltaVI BetheBloch : Emin=1.05231 MeV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins hBrems: for kaon+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 18x1001, from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon+ XStype:3 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for kaon+ XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm hIoni: for kaon- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=1.05231 MeV deltaVI BetheBloch : Emin=1.05231 MeV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins hBrems: for kaon- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for kaon- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 18x1001, from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for kaon- XStype:3 SubType=1 BuildTable=1 Used Lambda table of kaon+ 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for kaon- XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm muIoni: for mu+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 200 keV deltaVI MuBetheBloch : Emin= 200 keV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins muBrems: for mu+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 21x1001, from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu+ XStype:3 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for mu+ XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm muIoni: for mu- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 200 keV deltaVI MuBetheBloch : Emin= 200 keV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins muBrems: for mu- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi muPairProd: for mu- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 21x1001, from 0.85 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for mu- XStype:3 SubType=1 BuildTable=1 Used Lambda table of mu+ 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for mu- XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi+ SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm hIoni: for pi+ XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=297.505 keV deltaVI BetheBloch : Emin=297.505 keV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins hBrems: for pi+ XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi+ XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 20x1001, from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi+ XStype:3 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 0 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for pi+ XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi- SubType= 10 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=Minimal Rfact=0.2 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=3 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV Nbins=240 100 eV - 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm hIoni: for pi- XStype:3 SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 StepFunction=(0.05, 1e-05 mm), integ: 3, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=297.505 keV deltaVI BetheBloch : Emin=297.505 keV Emax= 100 TeV deltaVI CSDA range table up to 1 GeV in 140 bins hBrems: for pi- XStype:1 SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ModifiedMephi hPairProd: for pi- XStype:1 SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 240 bins Lambda tables from threshold to 100 TeV, 20 bins/decade, spline: 1 Sampling table 20x1001, from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV ModifiedMephi CoulombScat: for pi- XStype:3 SubType=1 BuildTable=1 Used Lambda table of pi+ 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ===== EM models for the G4Region InnerRegion ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm SingleCoulombScat: for pi- XStype:2 SubType=1 BuildTable=1 Lambda table from 100 eV to 100 TeV, 20 bins/decade, spline: 1 0 < Theta(degree) < 180, pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== DummyModel : Emin= 0 eV Emax= 100 TeV StepLim=UseSafety Rfact=0.04 Gfact=2.5 Sfact=0.6 DispFlag:1 Skin=1 Llim=1 mm ===== EM models for the G4Region InnerRegion ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ========= Table of registered couples ============================ Index : 0 used in the geometry : Yes Material : galactic_vacuum Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 990 eV e- 990 eV e+ 990 eV proton 100 keV Region(s) which use this couple : DefaultRegionForTheWorld Index : 1 used in the geometry : Yes Material : silicon_metal Range cuts : gamma 1 mm e- 1 mm e+ 1 mm proton 1 mm Energy thresholds : gamma 6.93672 keV e- 546.311 keV e+ 525.593 keV proton 100 keV Region(s) which use this couple : DefaultRegionForTheWorld ================================================================== ### Run 0 starts. -------- WWWW ------- G4Exception-START -------- WWWW ------- *** G4Exception : Analysis_W001 issued by : G4RootNtupleFileManager::SetNtupleMergingMode Merging ntuples is not applicable in sequential application. Setting was ignored. *** This is just a warning message. *** -------- WWWW -------- G4Exception-END --------- WWWW ------- ... set ntuple merging row mode : row-wise - done ... create file : output.root - done ... open analysis file : output.root - done ... open analysis file : output.root - done --> Event 0 starts. --> Event 100 starts. --> Event 200 starts. --> Event 300 starts. --> Event 400 starts. --> Event 500 starts. --> Event 600 starts. --> Event 700 starts. --> Event 800 starts. --> Event 900 starts. --> Event 1000 starts. --> Event 1100 starts. --> Event 1200 starts. --> Event 1300 starts. --> Event 1400 starts. --> Event 1500 starts. --> Event 1600 starts. --> Event 1700 starts. --> Event 1800 starts. --> Event 1900 starts. --> Event 2000 starts. --> Event 2100 starts. --> Event 2200 starts. --> Event 2300 starts. --> Event 2400 starts. --> Event 2500 starts. --> Event 2600 starts. --> Event 2700 starts. --> Event 2800 starts. --> Event 2900 starts. --> Event 3000 starts. --> Event 3100 starts. --> Event 3200 starts. --> Event 3300 starts. --> Event 3400 starts. --> Event 3500 starts. --> Event 3600 starts. --> Event 3700 starts. --> Event 3800 starts. --> Event 3900 starts. --> Event 4000 starts. --> Event 4100 starts. --> Event 4200 starts. --> Event 4300 starts. --> Event 4400 starts. --> Event 4500 starts. --> Event 4600 starts. --> Event 4700 starts. --> Event 4800 starts. --> Event 4900 starts. Run terminated. Run Summary Number of events processed : 5000 User=13.650000s Real=14.162216s Sys=0.010000s ... write file : output.root - done ... close file : output.root - done Graphics systems deleted. Visualization Manager deleting... ================== Deleting memory pools =================== Number of memory pools allocated: 9 of which, static: 0 Dynamic pools deleted: 9 / Total memory freed: 0.016 MB ============================================================