# ---------------------------------------------------------
# THIS MACRO PERMIT TO RECONSTRUCT THE SPREAD OUT BRAGG PEAK
# MODULATING THE PROTON BEAM ENERGY BY MEANS OF A ROTATING
# MODULATOR WHEEL.
# HERE THE WHEEL IS ROTATED OF 1 DEGREE AT EACH RUN AND 
# ONE THOUSAND PROTON HYSTORIES ARE SIMULATED IN EACH 
# RUN
# IN ORDER TO INCREASE THE RESOLUTION MORE EVENT CAN ADDED
# OR A SMALLER ANGLE CAN BE CHOSEN.
# 
# NOTE THAT THE MODULATOR MATERIAL IS AIR FOR DEFAULT.
# IF ONE WANT CARRY OUT A SIMULATION WITH
# THE MODULATOR HE/SHE MUST MODIFY  "HadrontherapyModulator.cc"
# AND SET the <<ModMater>> TO "PMMA".
#
# USERS SHOULD GIVE A LOOK TO THE HELP OF THE IDLE TO KNOW
# THE ACTIVATED MESSSENGERS FOR THE GEOMETRY
#
# 
# ANYWAY SEND ME AN E-MAIL FOR ANY QUESTION: cirrone@lns.infn.it.   
# --------------------------------------------------------------------------------  
#########################
# Set of the verboses 
#
/control/verbose 1
/tracking/verbose 0
/run/verbose 0
/event/verbose 0

##########################
# Set of the physic models
#
/Physics/addPhysics HADRONTHERAPY_1
/run/numberOfThreads 7

 
##########################
# Initialisation procedure
#
/run/initialize

# Set a very high time threshold to allow all decays to happen
/process/had/rdm/thresholdForVeryLongDecayTime 1.0e+60 year

##########################
# Visualisation 
#
#/vis/open OGLI 600x600-0+0
##/vis/open  ## open the default viewer
#/vis/viewer/flush
#/vis/viewer/set/viewpointThetaPhi 50 130 deg
#/vis/scene/add/axes 0 0 0 0.1 m
#/vis/viewer/zoom 1
#/vis/viewer/panTo -80  40 cm
#/vis/scene/add/trajectories
#/vis/viewer/update
#/vis/scene/endOfEventAction accumulate
#/vis/viewer/set/hiddenMarker 1
#########################
# Set the primary particle type,
# energy and position along the X direction
#

#---------------------------gps-----------------
/gps/pos/shape Circle
/gps/pos/centre -310. 0. 0. cm
/gps/pos/radius 0. mm
/gps/pos/sigma_r 2.5 mm
/gps/particle proton
/gps/pos/type Beam


# the incident surface is in the y-z plane

/gps/pos/rot1 0 1 0
/gps/pos/rot2 0 0 1

# the beam is travelling along the x-axis without any angular dispersion (angular despersion set to 0.0)
#

/gps/ang/rot1 0 0 1
/gps/ang/rot2 0 1 0 
/gps/ang/type beam1d 
/gps/ang/sigma_r 0. deg


# the beam energy is in gaussian profile
#
/gps/ene/type Gauss
/gps/ene/mono 62 MeV
/gps/ene/sigma 0.3 MeV


##########################
# Set here the cut and the step max for the tracking. 
# Suggested values of cut and step:
#
/run/setCutForRegion DetectorLog 0.1 mm

# Cut for the rest of the volume
/run/setCut 1 mm

#/Step/waterPhantomStepMax 0.1 mm 

/changePhantom/size 40 40 40  cm
/changePhantom/position 20 0 0 cm

/changeDetector/size 4 4 4 cm
/changeDetector/voxelSize .1 40 40 mm

/changeDetector/displacement 0 18. 18. cm
/changePhantom/update


# IF YOU WANT A RANGE SHIFTER PLEASE CHANGE
# THE FOLLOWIG PARAMETERS
# SETTING FOR THE RANGE SHIFTER

# /beamLine/RangeShifter/G4_PLEXIGLASS
# /beamLine/RangeShifter/thickness 1 cm
##########################################################
### Set the modulator properties

/modulator/ReadData  

# You can set as a parameter your data file in a right format instead if you left blank or input default, .. 
# .. data will be read from the default file "ModulWeight.txt"

/modulator/RMWMat G4_PLEXIGLASS
/modulator/position -2160.5 30 50 mm
/modulator/innerRadius 2.5 cm
/modulator/outRadius 9.5 cm
############################################################

#########################
# Start of the run
#
# If secondary particles dose & fluence are needed
/analysis/secondary true
/analysis/computeLet

/run/printProgress 1000

# START OF THE MODULATOR ROTATION
# IT CONSISTS IN A COMPLETE ROTATION 
# OF THE WHEEL (360 DEG)

# Running in loop 
/control/alias initialValue 0
/control/alias   finalValue 359
/control/alias     stepSize 1
/control/loop macro/modulator.loop counterName {initialValue} {finalValue} {stepSize}