=====================================================================
                        Geant4 - Cexmc advanced example
     =====================================================================

                                    README
                             -----------------------

Author: A. Radkov (alexey.radkov@gmail.com)

------> Introduction

Cexmc stands for Charge EXchange Monte Carlo. The program was used to simulate
real experiments in Petersburg Nuclear Physics Institute (PNPI, Russia).
Detailed User's Manual and explanatory images of the experimental setup can be
found in directory doc/ of this example.

------> Compilation

Basic modules of Cexmc must compile with Geant4 version 9.4. Cexmc won't compile
with older versions of Geant4. Cexmc contains several optional modules which can
be enabled or disabled in the makefile by setting dedicated macros: most of them
are listed in the beginning of the makefile and well commented. Modules may
involve additional dependencies. In the following table the dependencies and
related modules are shown.

Dependency        Requirement  Makefile Macro / Module      Comment
--------------------------------------------------------------------------------
boost::serialize  Optional      CEXMC_USE_PERSISTENCY /     used when
                                Persistency                 (de)serialization of
                                                            events and run data

boost::split      Optional      CEXMC_USE_PERSISTENCY /     used when parsing
                                Main                        command line
                                                            arguments related to
                                                            persistency module

boost::spirit     Optional      CEXMC_USE_CUSTOM_FILTER /   used in custom
                                Custom filter               filter engine

cernlib           Optional      CEXMC_USE_GENBOD / Main     user can choose
                                                            native GENBOD() as
                                                            phase space
                                                            generator

CERN ROOT         Optional      CEXMC_USE_ROOT /            used in histograming
                                Histograming

CERN ROOT / Qt    Optional      CEXMC_USE_ROOTQT /          used for live
binding                         Histograming                histograms in Qt
                                                            sessions
--------------------------------------------------------------------------------

The persistency module is compatible with a pretty old boost::serialize version
(compilation was tested under Scientific Linux 4.8 with gcc 3.4.6 and boost
version 1.32). Custom filter requires a newer boost as far as it uses modern
boost::spirit library which requires boost version 1.37 and higher.
Presence of CERN ROOT libraries is tested automatically in the makefile, but it
is possible to disable or enable the histograming framework manually using flag
CEXMC_USE_HISTOGRAMING in the makefile.
Compilation of visualization modules and interactive sessions depends on whether
standard Geant4 macros like G4VIS_USE, G4UI_USE, G4UI_USE_TCSH and G4UI_USE_QT
have been set.
If boost is installed in a special path in your system then you may need to
properly set environment variables BOOST_INCLUDE_PATH and BOOST_LIBRARY_PATH
which denote directories where boost include files and libraries are located.

------> Run modes

Run modes are set from command-line options. To see available command-line
options type in terminal 'cexmc -h' or just 'cexmc'. Some run modes can be
unavailable if certain modules were not compiled.

Here is list of run modes categorized by type of interaction with user:

   1. Batch mode. The simplest mode without any interaction with user.
      No command line option is required.
   2. Interactive mode. The program provides an interactive shell.
      To run in the interactive mode command line option -i must be specified.
   3. Graphical Qt mode. This mode is specified by command line option -g.

List of run modes categorized by task:

   1. Straight mode (or Monte Carlo mode). The program will read preinit and
      init macros, then calculate acceptances and (optionally) save data in
      project files. Project files are saved in a directory defined by
      environment variable CEXMC_PROJECTS_DIR (or in the current directory if it
      is not defined), name of the project is specified by option -w. Preinit
      and init macros are set by options -p and -m respectively. In the straight
      mode preinit macro must be specified explicitly, as far as desired
      production model can be instantiated only in preinit phase.
   2. Replay mode (or Read project mode). In this mode the program will not use
      common Geant4's event loop. Instead, it will sequentially read event data
      from an existing project and pass them into
      CexmcEventAction::EndOfEventAction(). The read project is specified by
      option -r. This mode is useful when user wants to recalculate data from an
      existing project with different conditions (for example with different
      reconstruction parameters) or apply a custom filter. The results of run
      can be written again into another project.
   3. Show results mode (or Output mode). The program will output various data
      from an existing project (specified by option -r). Type(s) of data are
      specified in option -o. For example, to show results of a run user can
      specify -orun in command line. To show events, geometry and run results
      user can specify -oevents,geom,run.